Practical Brass Scuba Stage 1 Regulator , Anti Freeze Cold Water Scuba Regulator

ZT101Y Diving First Stage Head Regulator Brass Material Silver Appearance

Regulator First stages ZT101Y

Descriptions

Superbalance diaphragm type first stage head, external adjustable relative medium pressure, allowing technicians to quickly medium pressure fine tuning

The Marine grade brass body protects the internal components from water and contaminants while improving cold water performance

The triangulated high and middle pressure hole position provides abundant take over position, the main regulator and the standby regulator can be installed side by side horizontally without affecting each other

Specifications

Warning

(1) Do not assemble the low pressure tube on the high pressure hole of the first level unloader (with HP), nor connect the high pressure tube to the low pressure outlet of the first level unloader.

(2) The two-stage compressor is the medium-pressure air from the low-pressure outlet of the first-stage compressor, and the pressure is 0.95± 0.05mpa.

Select the high pressure pipe and medium pressure pipe to connect the hole.

Turn the high pressure plug and low pressure plug counterclockwise using a hex wrench.

Reserve these high and low pressure plugs for future use.

Base some lubricating oil to end thread of tube and o-ring (silicone oil may also be used, but silicone oil equipment should not be used on high oxygen diving).

Turn the pressure pipe clockwise to the corresponding outlet and use the torque tool to tighten the torque value. The torque value of the tool should be 40in-lbs.

ZhongTian Marine Technology Co., Ltd is a national high-tech enterprise integrating research and development, production and global sales. Its

main business is diving equipment, fire rescue equipment and ocean engineering equipment.

• Founded in 2012, it is headquartered in Shenzhen, China.
• Senior R&D team , including bachelor and master accounting for 100%,obtained more than 100 patents
• There is wholly-owned production base in Huizhou, covering the 8500 m² with more than 300 employees. The quality management system reached the advanced level.