200*220mm Directional Address Signs , Indoor Wayfinding Signage

Aurora Sign Event Directional Signage,Directional Address Signs

Aurora has a strong design team with 21 members, we have sufficient experiences in designing road signs and would like to share our experiences at our website. How to design a roadside sign is a big subject, which includes select sizes of the signs.

Ground Mounted versus Overhead Sign Structures Ground Mounted Signs ‐ Ground mounts are used for the majority of signs in Alberta. They are reasonably economic and consistent in appearance and placement. Guide signs are normally installed on the right side of the road, as this is where the driver expects to see them. However, under certain circumstances, signs can be mounted at other locations when it is beneficial to do so. These locations can include:

• In the median to increase conspicuity.
• On the left hand side of the road if there is a sharp right turn. Overhead Signs ‐ Overhead signs are used on freeways, expressways and major arterials where there are many lanes of traffic, sightline issues, or where the sign needs to be seen from a far distance. They are not normally installed on two‐lane highways. Overhead signs may be installed on a bridge type structure or cantilever. There are many situations where overhead sign structures may be beneficial:
• Traffic volumes at or near capacity.
• Complex interchange design.

• Collision experience indicates drivers having difficulty seeing the primary sign.
• Three or more lanes in each direction.
• Restricted sight distance.
• Closely spaced interchanges.
• Multi‐lane exits.
• Left hand exit.
• High percentage of trucks.
• Background street lighting.
• High speed of traffic.
• Consistency of sign message location through a series of interchanges.
• Insufficient space for ground‐mounted signs.
• Junction of a major route with another freeway.

The existence ofone or more of these conditions does not automatically justify the use of overhead signs. Some of the noted elements may be made less critical by close coordination between design and operation. Overhead sign supports, should not be installed in gore areas or other exposed locations.

Longitudinal Placement

The distance of a guide sign from an intersection is dependent upon the reading reaction and maneuver time and the resultant decision sight distance. Details of the distances of signs at intersections and interchanges are provided in the TCS Drawings in Sections A4.4 and A4.5. When all the information required by the driver cannot be placed on a single sign or on a number of signs at one location, a longitudinal separation of 100 to 150 m between sets of basic signs is required for all rural areas and 50 to 100 m for urban arterials and freeways. If the guide signs contain more than basic information then the distance between them becomes a function of the amount of information that the driver must read andabsorb, and must be increased.

Aurora is one of the top two sign manufacturers in China, we promise a 100% refund on our quality issues.

Aurora is your best signage supplier from China, please contact us if you want to buy signs from China.

Aurora Science and Technology Co., Ltd

Aurora Science and Technology HK Co., Ltd

Dongguan Zhilian Hardware Products Co., Ltd

Moncler, Victoria's Secret, Bath & Body Works, Chanel, Hennessy XO,Louis Vuitton, Nike,HUGO BOSS,Cartier

We have been doing sign business for over 17 years and our current clients are Nike, Victoria's Secret, Starbucks, McDonald's, Innisfree, CK, BOSS, Pandora, Burberry, Honda, Audi, Land Rover, Shell Petroleum etc. We are one of the top two sign manufacturers in China. We have 182 staffs and their average years work with Aurora is 8, we are proud of it. Aurora is very good at making metallic and acrylic items.

As a professional manufacturer an dcomprehensive signs and shop fixures maker in China, dedicated to provide customers with high quality signs, shop fixtures, visual merchandising products since 2005. Now Aurora has been becoming one of the leading sign manufacturers and exporters in China. In terms of quality, Aurora is one of top two munufacturers in China.

Aurora has 11,000 SQM factory located in Dongguan city and more than 400 advanced professional production machines. Such as vaccum electroplating machine, laser cutter, recessing machiners, scanners, vaccum forming machines, robot welding machines, Ul printers, brushing machine, polishing machines etc. With more than 12 years international exporting experiences, we have a wonderful understanding on the international quality certifications system for signs and shop fixtures, we use the electronic parts with CE, UL rated. To ensure our products are safe and reliable, we have ISO 9001:2015 system qualified.

Aurora is looking for partners worldwide to build our network which we can benefit from it together, there are following possibilities for us to collaborate(not limited):

1. We make products for you in China so you can enjoy the low cost;

2. You help us for our projects in your region

3. We help you for your projects in Asia

Looking foward wo talking to you if you are interested, thanks.