Large Scale 300r/Min TMW Brushless Synchronous Motor 10 KV IEC GB
Brand Name:THMotor
Certification:CE
Model Number:TDMK400
Minimum Order Quantity:1set
Delivery Time:70DAYS
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Chongqing Chongqing China
Address:
Room 607-609, Building 3, Central Plaza, No.34, Xi Jiao Road. Chongqing. China
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
TMW 500-36/2600 10KV Brushless Synchronous Motor
TDMK(TMW) series of large-scale AC three-phase synchronous motors
for mining mills comply with national standards such as
JB/T1473-2000 "Technical Conditions for Large-scale Three-phase AC
Synchronous Motors for Mining Mills". This series of motors adopts
a steel plate welded structure, and the ventilation mode is open
natural ventilation, and can also be made into a fully enclosed
duct ventilation mode. The motor and the mill are connected by a
coupling, which only bears torque, not axial force and radial
force. It is recommended to use a pneumatic clutch coupling, which
is conducive to starting with large loads. The seat type sliding
bearing generally adopts the oil ring structure or the compound
lubrication (with thin oil station) structure, depending on the
specific structure and load. The seat type bearing is installed on
the base plate with an insulating backing plate in the middle to
prevent the generation of shaft current.
This series of products are widely used in the transmission of mine
ball mills, rod mills, coal mills, etc.
TDMK(TMW) series TDMK500-36/2600 10KV motor features
The motor is horizontal.
Cylindrical shaft extension, other forms of drawing (without key)
are optional.
Plate welding base, optional box type base.
Adopt sliding bearing (end cover type or seat type), compound
lubrication (or compound lubrication + high pressure oil top).
The slip ring is located outside the bearing at the non-shaft
extension end, and there is an encoder installation position at the
end of the rotating shaft. The slip ring cover is fixed to the end
cover.
Viewed from the shaft extension end, the main junction box, the
measuring junction box, and the heater wiring are located on the
right side of the machine base (or the left side according to user
requirements).
An air-water cooler with a cooling fan is installed on the top (or
side) of the box-type frame.
With mounting bottom plate and anchor bolts, optional with mounting
bottom plate and anchor bolts, the order contract needs special
instructions.
Large Scale 300r/Min TMW Brushless Synchronous Motor 10 KV IEC GB
Inquiry Cart
0