

Add to Cart
Lithium Ion Battery Emergency Light LED Exit Light White 3W GS-027H
Technical Specifications
Mains Supply | AC220V-50Hz |
Power | 3W |
Duration Time | 3 Hours |
Recharge Period | 16 Hours |
Battery Size & Type | Lithium battery /Ni-CD/Ni-MH |
CCT | 6500k |
CRI | 70 |
Luminous Flux | 300 lm |
Protection Class | Class Ⅱ |
Operating Temperature | 0-40 ℃ |
Features
What Are Maintained Emergency Lights Types?
Maintained lights are illuminated all the time (24/7) for safety. This means that they switch to a battery-powered emergency output. Even if the power fails, the light will remain on.
This safety light is most commonly an LED, and it should illuminate an exit path and should be easily seen should there be a fire to provide the occupant's safety.
An emergency lighting system in continuous use is called a maintained system. These lighting systems typically remain illuminated 24/7, and each light has dual purposes - one as a regular emergency lamp and another as an emergency light. Maintained lighting systems are often used as escape route lighting and found in buildings such as hospitals or police stations.
What Are Non-Maintained Emergency Lights?
Non-maintained lights usually are not illuminated and will only
turn on (illuminate) when the power fails. - The batteries are
constantly being charged while ever there is power to the fitting.
Power can be cut to a building in the event of a fire. Fire safety
security alarm systems can control signs and luminaires. These fire
safety systems require appropriate training, building signs and
appropriate lighting.
Why would you use maintained over non-maintained emergency
lighting?
The lighting type depends on the area you are trying to protect or light - if the site requires a constant light because it is in a highly used part of the property or the room is not well lit. A maintained emergency light would be a better choice than a place of little traffic that is sufficiently lit. A non-maintained emergency light would be a good selection. The fitting can be in a non-illuminated state during regular operation and then turn the lighting on should there be a power failure.