U shape UV tube High ozone lamps decompose organic matter degrade
TOC
Straight tube series UV germicidal lamp
•Features:
1. The current is from 250mA to 2500mA; the lamp tube can withstand
high load power, and the maximum power density can exceed 2W/CM:
2. The electrode and quartz glass tube are specially treated, which
can prolong the life of the lamp and better maintain the UV output;
3. Multiple lamp holders can be selected, and customers can choose
according to the matching requirements.
4. High ozone lamps can generate hydroxyl radicals in water,
decompose organic matter, and degrade TOC
5. Different lamps can provide matching electronic ballasts, the
maximum output current of electronic ballasts exceeds 2500mA, and
the power factor is greater than 0.98;
6. The lamp life sequence is 12,000 hours." "With the promotion of
emerging UV coatings, inks and other photopolymer materials and
ultraviolet radiation light sources, the use of ultraviolet
high-pressure mercury lamps in printing and coating industries has
become more and more widespread, but because the operators do not
know much about this technology, use There have also been many
problems in China. As a manufacturer of UV light sources, we will
inform you of the precautions as follows:
1. The ultraviolet lamp tube must be matched with the same matched
ballast, magnetic leakage transformer and capacitor before it can
be used.
2. It must be installed in accordance with the wiring diagram
provided by the manufacturer.
3. The light box in which the lamp is installed must be equipped
with a good air cooling system to ensure the heat dissipation of
the lamp and prevent the substrate from being thermally deformed.
4. Before the tube is put on the machine, it is necessary to wipe
off the fingerprints and oil stains on the outer wall of the lamp
with gauze and alcohol, otherwise it will cause the lamp to lose
transparency after ignition. If the UV curing material has a higher
content of volatile solvents or work The environment is polluted by
dust. Please wipe the lamp with alcohol every other week to ensure
that the lamp does not devitrify prematurely.
5. During the whole use process, keep good contact between the lamp
cap and the contact point of the lamp, otherwise it will cause
serious oxidation of the lamp cap and cause the lamp tube seal to
burst.
6. The UV lamp can only be started when it is cooled down. ; When
restarting, you need to wait for the UV lamp to completely cool
down before starting. After 5 minutes; the more frequent the
switch, the shorter the lamp life.
7. The average lifespan of the high-pressure mercury lamp of Ningbo
UV Light & Electricity is 8000-1000 hours, and the surface
temperature of the lamp tube is 600~700℃ during normal operation.
Mainly related to the number of lamp starts.
8. It is strictly forbidden for the lamp and transformer to work in
an overloaded state to avoid lamp explosion or transformer burn-out
accidents. The power supply voltage should not fluctuate too much.
If it drops suddenly by more than 5%, it may go out by itself.
Anything that caused the lamp to burst due to the burning of the
lamp cap is not the internal quality of the lamp, and it is purely
improper use and will not be returned.
9. The transformer must have good natural ventilation conditions
for heat dissipation.
Application range:
1. Large-scale domestic sewage treatment, reclaimed water reuse,
disinfection and sterilization of industrial sewage treatment,
drinking water, residential water supply, pure water, high-purity
water;
2. Seawater treatment, central air conditioning, large ventilation
pipes, air disinfection and sterilization.
3. Disinfection and sterilization of various water bodies such as
pure water, domestic water, ionized water, and medical water;
4. Water treatment supporting equipment; Photocatalytic
photocatalyst degrades waste water, and is used in waste water
treatment.
5. Kitchen equipment, cutting boards and tableware disinfection
cabinets, and oil fume pipes to deodorize."
Exhaust gas treatment lamp series |
U-shaped amalgam germicidal lamp |
Item | specification |
Tube length: | 30-150 cm |
Lamp power: | 40-300 watts |
Ambient temperature: | up to 90 degrees Celsius |
Working life: | up to 13000 hours |
UV wavelength: | 185nm-254nm |
Warranty: | 1 year |
Application of Photolysis Ultraviolet Lamp |
1. Remove peculiar smell and purify industrial waste gas |
Using high-energy UV light with a wavelength of 185 nanometers, it
decomposes oxygen molecules in the air to generate ozone. Ozone has
a strong oxidizing effect on organic matter, degrading and
converting odorous gas substances into low-molecular-weight
compounds. Water and carbon dioxide provide immediate removal of
malodorous gases and other irritating odors |
|
|
2. Remove odor and purify industrial waste gas |
Food Processing Plant, Meat Processing Plant, Slaughterhouse,
Poultry Feed Factory, Paper Mill, Sewage Treatment Plant, Waste
Transfer Station, Manure Treatment, Oil Refinery, Rubber Factory,
Leather Factory, Printing Factory, Chemical Factory, Chinese and
Western Medicine Factory, Metal Deodorization and purification
treatment of organic and inorganic malodorous gases in foundries,
plastic recycling plants, spraying solvent lamps. |
|
|
|
3. Kitchen fume purification |
Kitchen fume purification Ultraviolet lamps that generate ozone can be used in oil fume
purification equipment. Ultraviolet light cools the oil molecules
to generate trace powder, carbon dioxide and water. The organic
matter in the oil fume is photolyzed and oxidized, and the odor in
the flue is also eliminated. In addition, there is no grease
residue in the fume exhaust pipe, which greatly eliminates the
hidden danger of fire. |
|
|
|