Silicone 1.5mm 3D Printer Heater 300w 30mm 220v Heated Bed
Brand Name:Tuohe
Certification:CE RoHS
Minimum Order Quantity:1
Delivery Time:within 48 hours
Payment Terms:Western Union, MoneyGram, T/T
Voltage:220v and can be customized, 12- 660v
Contact Now
Add to Cart
Active Member
Address:
Zhangjiagang leyu
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Silicone Rubber Heater Pad With Sensor For 3D Printer
Advantage:
- Wonderful silicone heater for your 3D printer build plate heating.
- Rated at 5.2 watts per square inch with fast and even heating.
- Equipped with NTC 100K thermistor ( Beta 25/50 3950K-1%) as temperature control sensor which is supported directly by Marlin firmware.
- 3M adhesive backing offers excellent and easy mounting onto most surfaces.
- Versatile and may be used in many other applications.
3D Printer Heater Details
| Supply voltage: | 0-400V,Please contact us for other voltages. |
| Insulation Material: | Silicone Rubber Coated Fiberglass |
| Max.Operating Temperature: | 260 Deg C or 500 Deg F |
| Max.Power Density: | 5w/sq.cm depending on application |
| Heating Elements | Wire Wound or Etched Foil.Please contact |
| Resistance Tolerance: | about +/- 5% |
| Thickness: | 1.5mm |
| Flammability: | Flame retardant |
| Thermal Protection: | On board thermal fuse,thermostat,thermistor and PT100 are available as part of your thermal management solution. |
| Power Leads: | High temperature PTFE or Silicone insulation leads |
3D Printer Heater Temperature controller
* Surface Sensing Thermostats
* Adjustable Thermostats dial or digital
* Thermocouples (K, J or PT100 etc)
* Thermistor
* Thermal Protector
3D Printer Heater Features
1. Thinness, lightness, sticky and flexibility
2. Improve heat transfer, accelerate warming and decrease power
under the process of operation
3. Heat fast and high thermal conversion efficiency
Performance Capabilities for Blanket Heater
1. Operating temperatures up to 430°F (220°C)
2. Watt densities up to 0.1W/cm 2,dependent upon application
temperature
3. Wire-wound element thickness - 0.055 in. (1.5 mm)
4. Etched foil element - 0.022 in. (0.56 mm)
5. Waterproof and non-toxic(Waterproof grad:IP68)
Silicone 1.5mm 3D Printer Heater 300w 30mm 220v Heated Bed
Inquiry Cart
0