China Monochrome Graphic LCD Display Module 128x64 ST7565R FSTN Positive COG Display

China Monochrome Graphic LCD Display Module 128x64 ST7565R FSTN Positive COG Display Product Introduction

SAEF Technology SFBM12864YBA01 is a monochrome graphic type128x64 COG LCD module.

• Dot Matrix: 128×64 Dots
• LCD Mode: FSTN/POSITIVE/TRANSMISSIVE
• Controller IC:ST7565R
• Driving Method: 1/65 Duty; 1/9 Bias
• Viewing Angie: 6 O’clock direction
• 8080 MCU Interface OR 6800 MCU Interface OR 4-Line SPI Interface
• Operating voltage: 3.3V
• Operating Temperature Range: -20 to +70℃
• Storage Temperature Range : -30 to +80℃
• This LCD module is originally without touch, but touch panel is customizable.
• This module is widely used in POS terminal, cash reader, handheld device, mobile food ordering machine, meter and instrument, medical analyzer, etc.

Display Data RAM (DDRAM)

The Display Data RAM stores pixel data for the LCD. It is 65-row by 192-column addressable array. Each pixel can be selected when the page and column addresses are specified. The 65 rows are divided into 8 pages (Page 0~Page 7) of 8lines and the 9th page (Page 8) with a single line (D0 only). Data is written to the 8 lines of each page directly through D0 to D7. The display data of D0 to D7 from the microprocessor correspond to the LCD common lines. The LCD controller and MPU interface operate independently, data can be written into RAM at the same time when data is being displayed without flicker on LCD.

Page Address Circuit

This circuit is for providing a Page Address to Display Data RAM. It incorporates 4-bit Page Address register changed by only the “Set Page Address” instruction. The Page Address must be set before accessing DDRAM content. Page Address “8” is a special RAM area for the icons and display data D0 is only valid.

Column Address Circuit

Column Address Circuit has a 8-bit preset counter that provides Column Address to the Display Data RAM (DDRAM). The DDRAM column address is specified by the “Set Column Address” command. The specified column address is incremented (+1) with each display data read/write access. This allows the MPU display data to be accessed continuously. Control flag MY can invert the output order of the COM pads. And the MX flag makes it possible to invert the relationship between the Column Address and the SEG outputs. It is necessary to rewrite the display data into DDRAM after changing MX flag setting

Please refer to ST7565R datasheet.

FAQ:

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples of different item numbers are acceptable.

Q2. What about the lead time?

A: For off-shelf products, in-stock samples immediately. 1-1.5 wks for sample remaking. 4-6 wks for mass production. For design-in products, 2-3 days for counter drawing proposal; 2 wks for sample making at drawing approval; 5-6 wks for trial-run/mass production at sample approval.

Q3. Do you have any MOQ limit for sample and production order?

A: Low MOQ. 3-5pcs for sample checking is available. Mass production MOQ is normally 1K/lot. We support qty lower than MP MOQ for trail-run/PP-run order.

Q4. How do you ship the goods and how long does it take to arrive?

A: Ship by DHL, UPS, FedEx or TNT. It takes 5-7 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for LCD module?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6. Is it OK to print my logo on the LCD product?

A: Yes. Please inform us formally in design stage, and we will make samples with your logo for your sample test and approval. At sample approval, the mass production will follow the approved samples.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 1 year warranty to our products.

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lcds with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

China Monochrome Graphic LCD Display Module 128x64 ST7565R FSTN Positive COG Display Product Drawing

(without Backlight)

(with Backlight)

128x64 COG Graphic LCM Real Product Demostration

Factory Facilities and Certificates

Contact Us

We love to hear about your projects, If you have any questions, we can be reached at sales2@saef.com.cn

Search Keyword: 128x64 lcd, 128x64 lcd, lcd 128x64, 12864 graphic, graphic lcd 12864, COG 128x64, 128x64 COG LCD,Monochrome Graphic LCD Display 128x64

Founded in 2007, ShenZhen SAEF Technology Co., Ltd is committed to manufacturing and developing high-quality products for industrial LCD display, including TFT LCD, OLED, monochrome TN/STN/FSTN LCM display modules and system integration solutions. Saef Technology has become a leading enterprise in the field of small and medium size displays, and its continuous innovation has enable it to obtain a number of invention patents in the display field. With more than 14 years of experience, providing competitive products and services through stable product quality and professional pre-sales and after-sales service, SAEF technology has won the recognition of many international big brand companies and established long-term and stable cooperation with them.

Saef Technology is an ISO9001 and environmental ISO 14001 certified manufacturer. We provide 1 to 10 years warranty for all the company’s products. We are not only a display manufacturer but also a solution partner for our customers.

As a leading manufacturer in the display module market, Saef Technology will continue to focus on the research and development of new technologies such as TFT, OLED display, embedded systems integration solutions, and we will continue to provide customers display products with high cost performance.