2 Color Flexographic Printing Machine for Plastic Film, Paper, Aluminum Foil, Non Woven Fabric and Paper Rolls
Brand Name:haijing
Certification:CE
Model Number:HJ-500
Minimum Order Quantity:1 SET
Delivery Time:15
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Address:
Feiyun Street, Ruian City
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
2 Color Flexographic Printing Machine of plastic film paper aluminum foil Non Woven Fabric Paper Rolls
2 Color Flexographic Printing Machine
This machine is easy to operate,soft start,meter can set the number
of printing according to requirements,pneumatic landing printing
drum,ink automatic stirring.Frequency control.
Supply Ability: 10 Set/Sets per Month
Packaging Details :film packing and wooden packing ( with flexible wrapping and wooden
case.)
Port:Ningbo
Equipment features:
Equipment features:
1. Simple operation, soft start and accurate color setting
2, the counter can be set according to the requirements of the printing quantity, the number of automatic stop, automatic stop
material
3, mobile phone printing plate cylinder, up and down the ink automatic mixing
4, the roller ink, ink uniform
5, reliable drying system, with high speed operation, stop automatic circuit break
6. Longitudinal flower matching device with continuous adjustable 360-degree;
7. Variable frequency motor speed regulation to adapt to different printing speeds;
8. Inching and stopping buttons are installed on the plate roller seat and the material receiving rack to facilitate the operation
of the machine during plate mounting.
1. Simple operation, soft start and accurate color setting
2, the counter can be set according to the requirements of the printing quantity, the number of automatic stop, automatic stop
material
3, mobile phone printing plate cylinder, up and down the ink automatic mixing
4, the roller ink, ink uniform
5, reliable drying system, with high speed operation, stop automatic circuit break
6. Longitudinal flower matching device with continuous adjustable 360-degree;
7. Variable frequency motor speed regulation to adapt to different printing speeds;
8. Inching and stopping buttons are installed on the plate roller seat and the material receiving rack to facilitate the operation
of the machine during plate mounting.
Characteristics:
1) Central impression type printing machine with better color
registration. Due to the big drum, the printed material is
supported by the big drum, and greatly improving color registration, especially with extensible materials.
2) All colors printing station drived by the central drum, Less transmission errors because of less gear transmission, increase
the registration precision.
3) Adopting high-quality motor, high-quality inverter, save the electricity, reduce the run fluctuation.
4) The machine is equipped with blower and heater; and the heater employed central temperature control system,
automatic temperature controller, and separated heat source.
5) The use of individual drying oven and cold wind system can effectively prevent the ink adhesion after printing.
6) Roller adopts special steel processing, and through special treatment, greatly reduce the beating range.
7)Printing roller uses static balance and dynamic balance processing, hard anode oxidation treatment, small resistance,
beating small, achieves finally perfect printing effect.
8)Accurate printing effect achieved by special gear transmission device.
9)The printing machine all can choose advance configurations to achieve the high quality, the high-definition effect.
supported by the big drum, and greatly improving color registration, especially with extensible materials.
2) All colors printing station drived by the central drum, Less transmission errors because of less gear transmission, increase
the registration precision.
3) Adopting high-quality motor, high-quality inverter, save the electricity, reduce the run fluctuation.
4) The machine is equipped with blower and heater; and the heater employed central temperature control system,
automatic temperature controller, and separated heat source.
5) The use of individual drying oven and cold wind system can effectively prevent the ink adhesion after printing.
6) Roller adopts special steel processing, and through special treatment, greatly reduce the beating range.
7)Printing roller uses static balance and dynamic balance processing, hard anode oxidation treatment, small resistance,
beating small, achieves finally perfect printing effect.
8)Accurate printing effect achieved by special gear transmission device.
9)The printing machine all can choose advance configurations to achieve the high quality, the high-definition effect.
Product configuration
Feeding material part:
1.Single unwinder system, pneumatic/hydraulic loader or by manual
for unwind system for you choose
2.Automatic stop machine when
break the material; When machine stop, keep tension and avoid the material loose or line deflection.
3.Air shaft 4.EPC (edge
position control): With manually/automatically/ central return function, can adjust the rewind move left and right .
4.Automatic tension control system with magnetic brake(5KG).
5.Roller core diameter: 76mm
6.Discharge maximum diameter: 1000mm
2.Automatic stop machine when
break the material; When machine stop, keep tension and avoid the material loose or line deflection.
3.Air shaft 4.EPC (edge
position control): With manually/automatically/ central return function, can adjust the rewind move left and right .
4.Automatic tension control system with magnetic brake(5KG).
5.Roller core diameter: 76mm
6.Discharge maximum diameter: 1000mm
Specification
Model | HJ-2600 | Dia. Of Roller | 76mm |
Material | Film, Non-woven fabric, Paper, and so on | Type of Unwind | Manual |
Max. Width of Printing Material | 600mm | Constitution of Traction | Rubber Roller and Chrome plated Roller |
Max. Effective Width of Printing | 560mm | Traction Zones | 2 |
Length Range of Printed Product | 191-914mm | Principle of Work: | Gears Drive |
Speed of Material Printing | 10-50m/min | Type of Chromatically: | 360 degree circulating |
Thickness of Plate | 2.38mm | Heating Zones: | 4 zones |
Machine dimension(L×W×H) | 2300×1600×2200mm | Power of Heating : | 6KW |
Machine weight | 1500KGS | Transportatiom | By sea |
2 Color Flexographic Printing Machine for Plastic Film, Paper, Aluminum Foil, Non Woven Fabric and Paper Rolls
Inquiry Cart
0