440-460nm Smd 3030 LED Chip 2w 3v 40-50lm For Lamp
Brand Name:PHOENIX
Certification:ANSI/ESDA/JEDEC JS-001
Model Number:CERAMIC3030
Minimum Order Quantity:5000PCS
Delivery Time:7-10 DAYS
Payment Terms:Western Union, MoneyGram, T/T
Contact Now
Add to Cart
Site Member
Location:
Suzhou Jiangsu China
Address:
Bld#20,NO 88 Lingshan road ,wuzhong district,suzhou, jiangsu ,China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
3V 700MA 2W CERAMIC3030 40-50LM 440-460NM SMD LED CHIP FOR PLANT LIGHTING
Characteristic
Professional plant led:
Dark blue (450 nm) and ultra red (660 nm) versions provide the
light required for photosynthesis
The far infrared (730 nm) version can control the whole process of
plants from germination to vegetative growth and then to flowerin
EQ white light can realize humanized working environment
High energy efficiency( μ mol/J)
Maximum drive current high
Low thermal resistance
Multiple radiation angles - 80 °, 120 ° and 150 ° wide illumination
characteristics
Highly reliable ceramic package with long service life and
corrosion resistance
Rugged even in wet environments
In addition, it also provides blue light, true green light, yellow
light, red light and other versions, which are suitable for special
lighting needs
Optimum heat / cold flux coefficient (85 ° C ~ 25 ° C)
Maximum Ratings
Parameter Symbol Values
| Operating Temperature | T op | min. max. | -40 °C 120 °C |
| Storage Temperature | T stg | min. max. | -40 °C 120 °C |
| Junction Temperature | T | max. | 135 °C |
| Junction Temperature absolute* | Tjabs | max. | 150 °C |
| Forward current | I | min. max. | 100 mA 2000 mA |
Surge Current t ≤ 10 µs; D = 0.005 %; TJ = 25 °C | FS | max. | 2000 mA |
| Reverse voltage 2) | V | Not designed for reverse operation | |
ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 3B) | ESD | 8 kV |
This is verified by testing 30 pieces. Pass criteria: No catastrophic failures allowed, luminous flux must be better than L70B50 after 1000 h.
Characteristics
I = 700 mA; TJ = 25 °C
Parameter Symbol Values
| Peak Wavelength | λpeak typ. 445 nm |
Dominant Wavelength 3) I = 700 mA | min. 444 nm typ. 450 nm max. 457 nm |
| Spectral Bandwidth at rel,max | ∆λ typ. 18 nm |
| Viewing angle at 50% IV | 2φ typ. 120 ° |
Forward Voltage 4) I = 700 mA | VF min. 2.80 V typ. 2.90 V max. 3.20 V |
| Reverse current 2) | IR Not designed for reverse operation |
| Electrical thermal resistance junction/solderpoint with efficiency ηe = 65 % | RthJS elec. typ. 1.3 K / W |
Forward Voltage Groups
Group Forward Voltage 4)
I = 700 mA
VF:
| 2.8v | 2.9v |
| 2.9v | 3.0v |
| 3.0v | 3.1v |
| 3.1v | 3.2v |
Wavelength
Group
Dominant Wavelength 3)
I = 700 mA
λdom
| 444nm | 449nm |
| 449nm | 453nm |
| 453nm | 457nm |
Relative Spectral Emission
Irel = f (λ); IF = 700 mA; TJ = 25 °C
Radiation Characteristics
Irel = f (ϕ); TJ = 25 °C
Dimensional Drawing
Further Information: 29.0 mg
Approximate Weight: Package marking: Cathode
Corrosion test: Class: 3B
Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43)
ESD advice: The device is protected by ESD device which is connected in parallel to the Chip.
Reflow Soldering Profile
Product complies to MSL Level 2 acc. to JEDEC J-STD-020E
Profile Feature Symbol Pb-Free (SnAgCu) Assembly Unit
Minimum Recommendation Maximum
Ramp-up rate to preheat*) 2 25 °C to 150 °C | 3 | K/s |
tS 60 100 T to T | 120 | s |
Ramp-up rate to peak*) 2 T to T | 3 | K/s |
| Liquidus temperature TL 217 | °C | |
| Time above liquidus temperature tL 80 | 100 | s |
| Peak temperature T 245 | 260 | °C |
Time within 5 °C of the specified peak 10 20 temperature TP - 5 K | 30 | s |
Ramp-down rate* 3 T to 100 °C | 6 | K/s |
Time 25 °C to TP | 480 | s |
All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-
440-460nm Smd 3030 LED Chip 2w 3v 40-50lm For Lamp
Inquiry Cart
0