High Brightness Smd 2835 LED Chip 9v 80-85lm For Bulb Lamp

Application Introduction:

In the process of using LED light-emitting module, we must pay attention to the problem of voltage drop. Never make only one circuit, from the first series to the end. This will not only lead to inconsistent brightness due to different voltages between the head and tail, but also cause the problem of excessive single circuit current burning the circuit board. The correct approach is to connect more circuits in parallel as much as possible to ensure the reasonable distribution of voltage and current. In addition, if anti-corrosion materials need to be used inside the word cavity, it is best to use white primer to increase its reflection coefficient.

High brightness 2835 9v 0.5w smd led chip 80-85lm for bulb lamp​

Quick details:

Product specification:

Package Structure

Absolute Maximum Ratings

Typical Electro-Optical characteristics curves:

LED Reliability Test List

Packaging:

Cautions:

The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the

Top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions Should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle,The pressure on the silicone resin should be proper.

Soldering iron :
When hand soldering, the temperature of the iron must less than 300℃ for 3 seconds
The hand solder should be done only one times

SMT Reflow Soldering Instructions SMT :
Reflow soldering should not be done more than two times
When soldering , do not put stress on the LEDs during heating
The recommended reflow soldering profile as following

Handling Precautions :
Handle the component along the side surface by using forceps or appropriate tools
Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry
Do not stack together assembled PCBs containing LEDs. Impact may scratch the silicone lens or damage the internal circuitry

Product features:

Adopt good quality chip and frame ,antistatic good stability Ultra low attenuation

High brightness ,low attenuation high color rendering

Minimum 70,80,90 95 CRI options

Strong welding and good stability undead light

Product series and company logo on the front

CE ROHS LM80 Certification

Production Process:

Phoenix (suzhou) Electronic Co., Ltd is a modern enterprise specializing in LED packaging production. Products are widely used in UV curing, sterilization, office lighting, commercial lighting, advertising lighting and other fields. The company was founded in 2008. After nearly ten years of precipitation and accumulation, our company is full of talents and vitality. There are more than 5000 square meters of workshops and supporting facilities, more than 60 new production lines, a large number of professional engineering and technical personnel, rich production experience and advanced production technology. They often analyze and customize products for customers, which can not only meet the special-shaped needs of customers, but also meet the needs of large-scale orders.