

Add to Cart
Double Liquids Movable Cement Injection Grouting Machine Customized
Cement Injection Grouting Machine
Description of Cement Injection Grouting Machine:
Two liquids cement sodium silicate grout pump should not be
subjected to severe vibration and impact during transportation in
order to avoid damage to the machine parts, nor should it be mixed
with corrosive substances for transportation. The main engine
should be stored in a dry, ventilated, non-corrosive place, and do
a good job in rainproof (snow), moisture-proof and waterproof work.
If the grouting pump is placed for a long time, when it is put into
use again, attention should be paid to checking the aging of the
oil pipe and the blockage of the pipeline, etc. After
troubleshooting, the machine can be tested.
Parameters of Cement Injection Grouting Machine:
Model | SY80/80 | SY80/110 |
Cylinder diameter | 80mm | 110mm |
Motor power | 7.5-15kw | 11-15kw |
Gear pump type (pressure) | CB-FC40 (16Mpa) | CB-FC50 (16Mpa) |
Gear pump discharge volume | 40ml/r | 50ml/r |
Grouting capacity | 4-5m³/h | 5-7m³/h |
Outlet pressure | 0-10Mpa | 0-4Mpa |
Noise power level | 110dB(A) | 110dB(A) |
Outlet diameter | 32mm | 32mm |
Inlet diameter | 38mm | 38mm |
Cylinder number | 2 | 2 |
Conveying diatance | vertical: 80-100m horizontal: 200-300m | vertical: 60-80m horizontal: 200-300m |
Particle diameter size | ≤5mm | ≤5mm |
Suction Height | 2m | 2m |
Dimension size | 1700x900x1000mm | 1700x900x1000mm |
Tank volume | 45L | 45L |
Weight | 480-520kg | 530-550kg |
Working Performance of Cement Injection Grouting Machine:
This series of hydraulic grouting pumps are professional grouting
equipment, which can realize both single-liquid grouting and
double-liquid grouting. Because of the full hydraulic pressure,
small size and light weight, it can be used in a wide range of
construction. Good adjustability: the pump's pressure displacement
can be arbitrarily adjusted within the design range. When the
pressure exceeds the allowable pressure, the relief valve will
automatically open and the cylinder and working cylinder will stop
working, thus playing a safe role. The motor and air cooler of this
series of grouting pump can be used in flammable and explosive
construction sites such as coal mines after being replaced with
explosion-proof components. A shock-resistant pressure gauge is
installed in the hydraulic system, which can accurately reflect the
working state of the pump. This series of hydraulic grouting pumps
can also be used as water pumps, sewage pumps and mud pumps.
Pictures of Cement Injection Grouting Machine: