Construction 15Kw Mobile Concrete Pump For Fine Aggregate

Secondary structure pump large power Concrete Pump Mobile fine aggregate concrete

Concrete Pump Mobile

Requirements for Concrete of Concrete Pump Mobile:
1. The concrete in pumping should usually use ready-mixed concrete, and a mixing station can also be set up on site to supply pumping concrete. Hand-mixed concrete cannot be pumped. At the same time in the pumping of concrete supply should be strictly controlled, pay attention to the change of slump at any time, do not meet the pumping requirements of concrete is not allowed to pump, in order to ensure the effective work of concrete pump.
2. The sand ratio of concrete should be 38% ~ 45%.
3. Concrete mix ratio shall meet the requirements of pumpability in addition to the requirements of concrete design strength and durability.

Parameter of Concrete Pump Mobile:

Working process of Concrete Pump Mobile:

First of all, the concrete pump must be parked on flat, solid ground, absolutely not on soft ground, in order to avoid the inclination in the process of work.

Start the main motor for a short time operation, and observe whether the pressure gauge is normal. According to the length of the pipeline, before starting the construction work, we must first pump the water into the pipeline through the pendulum valve to lubricate the pipe wall. Then mortar, and finally concrete, work begins, and often run the test pump empty, with clear water pumping to confirm the smooth pipeline.

Pictures of Concrete Pump Mobile:

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.