ABM Large Expansion PU Polyurethane PU Foam Sealant for Door Insulation
Brand Name:Alger
Model Number:Al-1204
Minimum Order Quantity:100 Pieces
Place of Origin:Liaoning, China
Packaging Details:Pu foam sealant packed in carton or pallet.
Supply Ability:10000 Piece/Pieces per Month
Contact Now
Add to Cart
Active Member
Location:
Yingkou Liaoning China
Address:
Xiguantun ,bayuquan district, yingkou city ,liaoning
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Product Description
Large expansion PU foam sealant is an one-component,
self-expanding,multipurpose polyurethane foam. This foam will
expand and cure
by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with
excellent mounting capacities, high thermal and acoustical insulation. Higher expansion rate than normal Pu foam.
by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with
excellent mounting capacities, high thermal and acoustical insulation. Higher expansion rate than normal Pu foam.
CONSTRUCTION ADVICE:
1. Remove surface dust and oil before construction. Spray a little
water on the construction surface when the humidity is below 50
°C, otherwise the curing will be slow. 2. Shake the tank for one minute before use. 3. Vertical gap construction from bottom to
top. 4. Please clean the foaming agent and the foaming agent gun with a cleaning agent before the foam is cured. 5. The dry time
is about 5 minutes. It can be cut after 30 minutes. It is recommended to cut after 1 hour, stabilize after 3-5 hours, and fully
cure at 24 hours. 6. This product is not UV-resistant. It is recommended to make a layer of shade or paint on the surface of the
gel to prevent direct light, thus extending the service life. 7. When the temperature is lower than 50 °C, the tank should be
heated with 40-50C warm water to ensure the foam in the tank is finished and the foaming multiple is increased.
°C, otherwise the curing will be slow. 2. Shake the tank for one minute before use. 3. Vertical gap construction from bottom to
top. 4. Please clean the foaming agent and the foaming agent gun with a cleaning agent before the foam is cured. 5. The dry time
is about 5 minutes. It can be cut after 30 minutes. It is recommended to cut after 1 hour, stabilize after 3-5 hours, and fully
cure at 24 hours. 6. This product is not UV-resistant. It is recommended to make a layer of shade or paint on the surface of the
gel to prevent direct light, thus extending the service life. 7. When the temperature is lower than 50 °C, the tank should be
heated with 40-50C warm water to ensure the foam in the tank is finished and the foaming multiple is increased.
PRECAUTIONS:
1. Please prepare for construction before construction, wear
gloves, wear overalls, and wear protective glasses if necessary.
Cover the surrounding objects with waste newspapers to prevent contamination by the sprayed colloid. 2. If the foaming agent
touches the skin, please rinse it with soap and water in time. 3. The construction site should have ventilation conditions, and
should not be close to the fire source, and should not smoke. 4. After the product is cured, it has strong adhesiveness and is
permeable to the clothes fiber. Do not touch the clothes when using. 5. The used tank is strictly prohibited from burning or
puncture. 6. It is strictly forbidden to store or transport inverted or sideways (the valve will be blocked if the inversion time
is too long).
Cover the surrounding objects with waste newspapers to prevent contamination by the sprayed colloid. 2. If the foaming agent
touches the skin, please rinse it with soap and water in time. 3. The construction site should have ventilation conditions, and
should not be close to the fire source, and should not smoke. 4. After the product is cured, it has strong adhesiveness and is
permeable to the clothes fiber. Do not touch the clothes when using. 5. The used tank is strictly prohibited from burning or
puncture. 6. It is strictly forbidden to store or transport inverted or sideways (the valve will be blocked if the inversion time
is too long).
Specification
Material | Polyurethane foam |
Place of origin | China |
Dry time | About 10 min |
Size | 260ml/280ml/300ml |
Color | White |
Sample | Avaiable |
Finished product display
Related product:
Neutral / acetic silicone sealant
Glue gun sealant applicator
Weatherstrip for window and door
Glass transportation cork pads
Packing & Delivery
Company Profile
Liaoning Alger Building Materials And Machine Co.,LTD locates in
Bayuquan, Yingkou,Liaoning province, a beautiful coastal city.
Alger was established in 2008. Alger is committed to produce and provide environmental energy-saving building materials and advanced intelligent efficiency machineries with better technical support and service. We own several subsidiaries to manufacture materials.
Our team is young in average age but with mordern spirit of high technology. The products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Alger was established in 2008. Alger is committed to produce and provide environmental energy-saving building materials and advanced intelligent efficiency machineries with better technical support and service. We own several subsidiaries to manufacture materials.
Our team is young in average age but with mordern spirit of high technology. The products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Factory
Workplace
Warehouse
Ofice
Why choose us:
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
ABM Large Expansion PU Polyurethane PU Foam Sealant for Door Insulation
Inquiry Cart
0