AC welding controller
Brand Name:zhiyao
Model Number:ZK01
Minimum Order Quantity:1set
Delivery Time:1 work days
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Active Member
Address:
West side-1 of Mintai Avenue, Yizheng City, Jiangsu Province
Supplier`s last login times:
within 29 hours
Product Details
Company Profile
Product Details
Brief introduction
The welding process is controlled by the microcontroller inside the controller in a closed loop, which can ensure that the welding current is constant when the power grid voltage fluctuates and the welding load changes, thus ensuring the quality of the solder joint. The controller has the following main functions:
1. There are three kinds of control functions: constant current, constant voltage and constant phase angle.
2. It can control two solenoid valves (with boost control).
3. There are two norms to choose from: four norms and 15 norms.
4. There are single spot welding and continuous spot welding functions.
5. All the specification parameters are displayed directly through the window, and the operation is simple and convenient.
6. There is a power off data saving function.
7. There is an error self-detection function, and various abnormal situations are displayed in numbers.
Technical parameters
The technical parameters of the controller are shown in Table 1, and the specification parameters are shown in Table 2.
Table 1 Technical data sheet
| Name | Scope |
|
Power supply
|
AC220V/AC380,50/60Hz,+10%～-20% |
|
Ambient temperature
|
0-50℃ |
|
Humidity
|
≤90% |
|
Air valve specifications
|
DC24V
|
Table 2 Specification parameter table
|
Norms |
Data range |
Remarks |
|
Pressurization time (frequency) |
0~99 |
|
|
Increment the time(frequency) |
1~99 |
|
|
Welding 1 time(frequency) |
1~99 |
|
|
Welding 1 current |
Constant pressure mode10~199, Constant current mode1.0~50.0 |
When selecting the voltage mode, the current setting range of the welding 1 current is10~199(The unit is 100A). When selecting the current mode, the current setting range of the welding 1 current is1.0~50.0(The unit is KA). |
|
Cooldown time(frequency) |
0~99 |
|
|
Welding 2(frequency) |
0~99 |
|
|
Welding 2 times |
Constant pressure mode10~199, Constant current mode1.0~50.0 |
When selecting the voltage mode, the current setting range of the welding 1 current is10~199(The unit is 100A). When selecting the current mode, the current setting range of the welding 1 current is1.0~50.0(The unit is KA). |
|
Duration |
1~99 |
|
|
Rest time |
0~99 |
|
|
Current exceeds the limit |
5~99% |
|
|
Current under-limit |
5~99% |
|
|
Pre-pressurization time(frequency) |
0~99 |
|
|
Valve 2 Latency(frequency) |
0~99 |
|
|
Transformer ring ratio(M) |
1~199 |
|
|
Starting mode |
0~1 |
0:Conventional way； 1:Pulse start mode |
|
Current under-limit soldering control |
0~1 |
0:Welding is prohibited； 1:Allow 1 welding |
|
4/15Specification selection |
0~1 |
0:4specification； 1:15specification |
|
Foot switch/panel selection specification |
0~1 |
0:Panel selection specification；1:Foot switch select specification |
|
Seam weld control |
0~1 |
0:Ordinary point； 1:Seam welding method |
AC welding controller
Inquiry Cart
0