Product Details
AC Solution Emergency Battery Backup For LED UFO Highbay Light
Description
- Description: AC solution EM for 9-350W LED luminaire.
- It must connect 0/1-10V dimming wires if power of
luminaire>power of EM.
Features
-Battery overcharge protection
-Battery over-discharge protection
-Output overload protection
-Short-circuit protection
-Open load protection
ELECTRICAL SPECIFICATIONS
Input voltage | 100-347 VAC 50/60Hz |
Input Current | 0.15A max |
Input Power | 12W Max |
Power Factor | 0.7@230Vac,0.6@347Vac |
Output Voltage | 120-200Vdc 250V MAx |
Battery | Li-ion |
Recharge duration | 24Hrs |
Emergency duration | 90mins |
Ambient temp | 0-50°C(32℉-122℉) |
MODEL SELECTION TABLE
Models | | |
Emergency wattage |
30W
|
40W
|
Battery capacity
| 14.8V/5200mAh | 14.8V/6600mAh |
Compatible led fixture | 30-240W LED lamp with 0-10V dimming or LED lamp less than 30W without 0-10V dimming | 40-350W LED lamp with 0-10V dimming or LED lamp less than 40W without 0-10V dimming |
MOUNTING CONFIGURATION
NORMAL MODE
Fixtures will operate normally when power is available. When an
outage occurs, the fixture will switch to emergency mode,
delivering power to the fixture for up to 90 minutes.
EMERGENCY MODE
1.The emergency battery backup enters the emergency mode
immediately after the mains power failure.
2.Stop the emergency and return to the charging state after the
mains power call.
SELF-TEST
MONTHLY SELF-TEST
It will automatically perform a monthly self-test every 30 days
with a duration of 30S to check whether the emergency function is
normal, and automatically restore to normal charging after 30S
discharged.
ANNUAL SELF-TEST
An annual self-test will be done every year(12 months) with a
duration of more than 90mins to check whether the capacity of the
battery pack is normal, and automatically restore to normal charging after fully discharged.
(the condition of annual test is that the battery pack is fully charged). If the annual inspection is interrupted, it will be
retested after recovery and when the test conditions are met.
(Possibility of interruption: such as sudden power failure, sudden manual test).
ES-EIB40-01S.pdf
Company Profile
Shenzhen HAISEN Technology Co.,Ltd,founded in March 2013, has
become a National High-Tech and ISO9001:2015 certificated
Enterprise.Our new facility, an owned property is located along
Songshan Lake of Dongguan city, neighbor of HUAWEI. Total footage
is 8,000m², with about 300 people.

We focus on developing and manufacturing 5.8G and 10.525G microwave
motion sensors, PIR Sensor and wireless control smart sensor
products. We have about 40 R&D engineers, they master core
hardware technology and software algorithm.

We produce the sensors all by ourselves. In our facility, you can
see our SMT manufacturing room, product dept with 4 semi-automatic
DIP lines, indepedent automatic testing rooms and package lines.

We have 30 people for Quality Center and we strictly follow
ISO9001:2015 quality management system.
The quality center are 2 parts:
Comprehensive Testing: Verification & Assessment of product
function and performance at early R&D stage
Quality Control: Quality supervision on incoming materials,
manufacturing process and delivery.

Our Marketing Center is constitute by Marketing, Domestic Sales and
International Sales.
To better support our customers, we have set up local offices in
East China and Xiamen; and developed agents in China and all over
the World.
