Product Details
ADS131B04QPWRQ1 Original IC CHIP ADC Converter 24bit 20-TSSOP SMD
Manufacturer: | Texas Instruments |
Product Category: | Analog to Digital Converters - ADC |
Series: | ADS131B04-Q1 |
Mounting Style: | SMD/SMT |
Package / Case: | TSSOP-20 |
Resolution: | 24 bit |
Number of Channels: | 4 Channel |
Interface Type: | SPI |
Sampling Rate: | 32 kS/s |
Input Type: | Differential |
Architecture: | Sigma-Delta |
Analog Supply Voltage: | 3.3 V |
Digital Supply Voltage: | 3.3 V |
Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 125 C |
Packaging: | Reel |
Packaging: | Cut Tape |
Brand: | Texas Instruments |
Development Kit: | ADS131B04-Q1EVM |
INL - Integral Nonlinearity: | 10 %/FSR |
Moisture Sensitive: | Yes |
Number of Converters: | 4 Converter |
Pd - Power Dissipation: | 28.1 mW |
Product: | Analog to Digital Converters |
Product Type: | ADCs - Analog to Digital Converters |
Reference Type: | Internal |
Reference Voltage: | 1.2 V |
Shutdown: | No Shutdown |
Subcategory: | Data Converter ICs |
Type: | Delta-Sigma ADC |
Texas Instruments ADS131B04-Q1 Delta-Sigma ADC
Texas Instruments ADS131B04-Q1 Delta-Sigma Analog-to-Digital
Converter (ADC) is a four-channel, simultaneous-sampling, 24-bit,
delta-sigma (ΔΣ) ADC. This ADC offers a wide dynamic range, low
power, and buffered analog inputs, making the device an excellent
fit for automotive battery management systems (BMS). The ADC inputs
can be directly interfaced to shunt resistors for bidirectional
battery-current measurements, to resistor-divider networks for
high-voltage measurements, or temperature sensors (such as
thermistors or analog output temperature sensors).The Texas Instruments ADS131B04-Q1 individual ADC channels can be
independently configured depending on the sensor input. A
low-noise, programmable gain amplifier (PGA) provides gains ranging
from 1 to 128 to amplify low-level signals. The device features a
global-chop mode to remove offset drift over temperature and time.
Additionally, this device integrates offset and gain calibration
registers to help remove signal-chain errors. A low-drift, 1.2V
reference, and precision oscillator are integrated into the device
reducing printed circuit board (PCB) area. Optional cyclic
redundancy checks (CRCs) on the data input, data output, and
register map maintain communication integrity.
The complete analog front-end (AFE) is offered in a 20-pin TSSOP
package and is specified over the automotive temperature range of
–40°C to +125°C.
FEATURES
- AEC-Q100 qualified for automotive applications
- –40°C to +125°C, TA temperature grade 1
- Functional Safety-Capable
- Documentation available to aid functional safety system design
- Four simultaneous-sampling, differential input ADCs
- Programmable data rate up to 32kSPS
- Programmable gain up to 128
- Noise performance
- 0.82µVRMS at 1kSPS, gain = 8
- Global-chop mode to remove offset drift over temperature and time
- High-impedance analog inputs for direct sensor connection
- Integrated negative charge pump allows input signal measurements
below ground
- –120dB crosstalk between channels
- 1.2V low-drift internal reference
- Precision internal oscillator
- Cyclic redundancy check (CRC) on communications and register map
- 2.7V to 3.6V analog and digital supplies
- 5mW at 3.3V AVDD and DVDD low power consumption
APPLICATIONS
- Automotive battery management systems (BMS)
- Current-shunt measurements
- Voltage measurements using external resistor dividers
- Temperature measurements using thermistors or analog output
temperature sensors
- EV charging stations
Company Profile
Yingxinyuan INT'L(Group) LTD. was established in 2001, specializing
in electronic components distribution business.The products are
widely used in communication equipment, power supply, medical
electronics, automotive electronics, digital electronics,
industrial electronics, display modules, intelligent electronics,
new energy, the Internet of things, 5G products and other
fields,With high-quality products, reasonable prices, rapid
distribution and timely service, we can provide customers with the
most cost-effective products and save customers a lot of time.