Add to Cart
P1.875mm Indoor LED Display Screen Boards Aluminum Module
Smooth exactness P1.875mm Aluminum module indoor LED display screen
1. the thickness of the bottom shell is 10mm, the classic black
appearance, thin and elegant
2. Keep the minimum error to ensure the perfect connection of the
splicing, so that the screen is more flat than the conventional
bottom case, and it is easier to install and splicing
Made of aluminum material, the structure is firm and not easy to
deform, and the good thermal conductivity makes the module easier
to dissipate heat, and the module is more stable under high and low
temperature changes.
3. The aluminum bottom shells in the world generally use 3M glue to
install the PCB. The Chengtong aluminum bottom shell can not only
be installed by sticking, but also can be installed by back-locking
screws, which can make the PCB fit the aluminum bottom perfectly.
Guaranteed flatness and accuracy.
frame rate :≥ 60HZ
refresh rate: ≥ 3840 Hz
way to control :Synchronize
project | parameter | Remark | |
Basic parameter | pixel pitch | 1.875mm _ | |
pixel structure | 1R1G1B | ||
pixel density | 284089 /m 2 | ||
Module resolution | 160 (W)* 90 (H) | ||
Module size | 300mm * 168.75mm * 12.6mm | ||
Optic parameter | Single point luminance, chromaticity correction | have | |
white balance brightness | ≥600 cd/㎡ | ||
color temperature | 3200K—9300K adjustable | ||
Horizontal viewing angle | ≥ 140° | ||
vertical viewing angle | ≥ 120° | ||
Visible distance | ≥3 meters | ||
Brightness uniformity | ≥97% | ||
Contrast | ≥3000:1 | ||
Operation characteristic | Signal processing bits | 16 bits*3 | |
grayscale | 65536 | ||
control distance | Network cable: 100 meters, Optical fiber: 10 kilometers | ||
drive mode | High gray-scale constant current source driver IC | ||
frame rate | ≥ 60HZ | ||
refresh rate | ≥ 384 0 Hz | ||
way to control | Synchronize | ||
Brightness adjustment range | 0 to 100 stepless adjustment | ||
Processing performance | Continuous working time | ≥72 hours | |
Typical life | 50,000 hours | ||
Protection class | IP20 | ||
range of working temperature | -20℃ to 50℃ | ||
Operating humidity range | 10 %- 80% RH non-condensing | ||
Storage temperature range | -20 ℃ to 60 ℃ | ||
Electricity parameter | Operating Voltage | DC: 4.2-5V | |
Power Requirements | AC: 220×(1±10%)V, 50×(1±5%)Hz | ||
Maximum power consumption | 680W / ㎡ _ | ||
Average power consumption | 270W / ㎡ _ |