Bubble Free Audi Matte Midnight Blue Car Wrap Film High Temperature
& Water Proof
Product Name: UV Resistant Vinyl Wrap Bubble Free Audi Matte Midnight Blue Car
Wrap
Product Description:
- Car wrap film is a process of transforming the color and looks of
your car by applying large sheets of pressure-sensitive vinyl film
to each individual panel on the car. Carbon fiber vinyl wrap film
is applied with extreme precision and skill and can only be carried
out by highly trained and specialized staff.
- Self adhesive vinyls come with an air-release adhesive for a super
fast, bubble-free application. This non-corrosive adhesive won't
eat through coatings or react with surfaces. Super-safe application
and removal.
- Ready to use right out of the box, no liquids or messy, toxic
chemicals needed. Water and abrasion resistant
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Matte | Color: | Matte Metallic |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive |
Thickness: | 30 µm | Color: | Clear |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5-7 years |
5. Product Size | Width | Length |
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) |
1.27 | 50 | 18 | 20 |
1.52 | 60 | 23 | 25 |
Notice: There is a Minimum Order Requirement for Special Product
Size.
|
Product Features:
- Faster positioning and air bubble-free car wrapping film
application
- Available in opaque and textured, special effect, and metallic
options
- Cost-efficient application
- Excellent conformability around curves and recesses
- Combines a colored film and protective layer in one convenient
construction with fewer seams
- Even the most experienced applicators are more productive, compared
to the standard permanent adhesive.
- Long term removability after the intended period of use
Advantages of Applying Car Wrap Film:
- Vinyl car wraps wear as well as, or better than paint – when
properly cared for. Think of it like a skin for your laptop or a
silicon cover for your phone. The vinyl can take a beating
protecting the vehicle’s paint underneath.
- Adds to the resell value of your car. When you remove it, your
paint is in the same condition as on the day it was wrapped. Thus
adding to the resale value by having flawless paint on your car. A
repainted car normally decreases the value of your vehicle due to
concerns over possible previous accident(s).
- It’s difficult to tell it’s not painted.
- Warranties and/or lease agreements remain valid. Painting can void
warranties and is not a lease option.
- You can restore the car to its original color by removing the wrap.
- Many of the styles can not be reproduced by paint.
- Hides scratch, small chips, and “freshens” the look of your
vehicle.
- Matte-paint jobs can be brittle and chip easily, while vinyl is
more durable and harder to scratch. In the event that repairs are
needed, the part that was damaged can be easily replaced, providing
a perfect match.
- You don’t have to wrap your entire car; you can just do your hood,
roof, mirrors, stripes, etc.
FAQs:
A . How long does vinyl wrap last?
Depending on the quality of the wrap, type of vinyl wrap, care
taken during installing, care for installation, and environmental
factors, car wraps can last from three to ten years.
B . Can I put my wrapped car through a car wash?
Hand washing is best for vinyl wraps, but brushless or touchless
car washes can be just as safe. You can even use a pressure washer
if you’re gentle.
C . How Do You Maintain a Wrapped Car?
The best way to ensure a wrap will last is to keep the car in a
garage. If you don't have a garage, invest in a good car cover. You
should handwash the car with soft microfiber towels. Automatic car
washes are off-limits: The harsh brushes could scratch or lift off
the wrap.
D . How to remove vinyl from your car?
1.Use your fingernail or plastic scraper to pull the wrap from the
edges of the entire panel. It’s going to look gnarly, but it’ll all
be gone in a few minutes.
2.Finally, use Turtle Wax Label & Sticker Remover or Bug &
Tar Remover to remove any adhesive residue from the surface of the
panel.
3.Pull the wrap away from the edges at a steep angle, pulling the
wrap back on itself at 15 to 20 degrees. When the wrap gets hard to
pull, reheat and start pulling again.