Add to Cart
7kw 32a AC EV Wall Box Charger Type1 J1772 Plug Level 2 EVSE OCPP 1.6J EV Charging Station
Attention to know
EV chargers are splash, water and dust resistant and have been
tested under strictly controlled laboratory
conditions to achieve an IP65 rating in accordance with IEC
standard 62196. However, the resistance to splashes, water and dust
is not permanent and may weaken over time under normal use. Damage
caused by liquids is not covered by the warranty.
To prevent damage to your charger from liquids, please avoid the
following situations :
1. Exposing the charger to pressurised water or high velocity water
flow.
2. Intentionally submerging the charger in water.
3.Operating the charger beyond the recommended temperature range or
in extremely humid environments
4. Dropping the charger or subjecting it to other shocks.
5. Disassemble the charger, including removing the screws.
If the charger comes into contact with liquid, turn off all power
until it is completely dry.
Placing the unit in front of a fan so that cold air is blowing
directly on the charging connector may help to speed up the drying
process.
Do not use an external heat source to dry the charger, or insert
foreign objects such as cotton swabs or paper towels into the
charging port.
AC Nominal Input | Phase | 1phase+neutral+PE |
Voltage | 230V±10% | |
Frequency | 50HZ | |
AC Nominal Output | Voltage | 230v±10% |
Current | 32A | |
Power | 7KW | |
Structure Design | Housing Material | PC+PBT |
Front Panel | Temper glass | |
Installation Method | Wall-mount/Floor-stand | |
Charging Outlet | 4M charging cable(Type1/Type2) | |
LED Indicator | Green /yellow/red/blue for different status | |
LCD Display | Display charging data | |
Emergency Stop Button | Yes | |
RFID Function | 2pcs cards | |
Environmental Index | Protection Level | IP65 for Box |
Temperature/Humidity | -30-50℃/5%-95% without condensation | |
Working altitude | <2000M | |
Application Site | Indoor /Outdoor | |
Security Protection | Multiple Protection | Over current&Under voltage&over voltage&Residual
current&Surge protection&short circuit&over
temperature&ground fault¤t leakage protection |
Safety Standard | EN61851-1 | |
MTBF | 10000 Hours | |
Warranty | 2 years | |
Package Information | Protection Dimension | 398*324*120mm |
Package size | 490*385*275mm | |
Net Weight | 8kg | |
Gross Weight | 10.5kg | |
External Packing | carton | |
Optional Parts | Network Gateway | Ethernet/WIFI/4G communication |
Communication Protocol | OCPP1.6(JSON) | |
RCD | TYPE B | |
Energy Meter | MID certified |