

Add to Cart
P-CAP Master Touch Custom-built Touch Panel with Structural Part
1. Product Description
Master Touch Touch Panel with Structure is to glue the structural parts whose size is the same as the TP's outline dimension and the TP with silicone or two-component glue, so that the two are firmly bonded together. Doing so can increase the overall strength and thus protect the TP to a certain extent.
This TPS product uses G + G Capacitive Touch Panel, which is made of a surface tempered glass and a ensor glass with Pcap technology. Projected Capacitive Technology permits more accurate and flexible operation by etching the conductive layer on the touch screen. GG is suitable for mass production and has better appearance properties, but it has high investment costs and is heavier than film-based panels.
2. Genaral Specification
2.1 Basic Features
Item | Feature | Remarks |
Controller | EETI3103-01 | |
Channel | TX: - RX:- | - |
Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
Communication | USB | USB: 2.0 Full Speed |
Touch points | 10 | - |
O.S. | Windows/ Android/ Linux | plug and play |
Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V |
2.2 Mechanical Features
Item | Specification | Unit |
Screen Size | 32 | Inch |
Viewing Area | 760.6(L)×394.1(W) | mm |
Cover lens O.D | 762.6(L)×457(W) | mm |
Item | Content |
V.A. Transparency | ≧85% |
3. Sensor Spec.
Item | Thickness | Unit | ||
Stacked structure | Cover | 4.0 | mm | |
SCA | 0.25 | |||
ITO | 1.1 | |||
Sensor Glass | ||||
ITO | ||||
Sensor Dimension | OD Size | X | 718.3 | |
Y | 416.3 |
4. Electrical Spec.
Item | Type | Value | Unit | Remarks |
Operating Temperature | - | -20 ~ +80 | ℃ | Humidity 20%~85% RH |
Storage Temperature | - | -30 ~ +80 | ℃ | Humidity 20%~85% RH |
ESD Requirement | ESD air requirement | ±8 | KV | Air |
ESD contact requirement | ±6 | KV | Touch |
5. Drawing
6. Details
7. FAQ