

Add to Cart
LT01 -1B is a 4G Cat - 4 motorcycle gps tracking support Relay control and ACC Detection device.This version is focus on Asia and other countries which support those network bands.
Physical | Dimension | 88mm*45mm*14mm(L*W*H) |
Weight | 47±5g | |
Cellular | Chipset | Fibcom L610 |
Frequency | •LTE FDD: Band 1/3/5/8 • LTE TDD: Band 34/38/39/40/41 • GSM: 900/1800MHz | |
GPS | Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Power | Input voltage | 9-100V |
Power consumption | Average Current: <30mA (DC 12V) Maximum current: <10mA (DC 12V) | |
Interface | Digital input(1) | Ignition detect |
Digital output(1) | Relay | |
GSM antenna | Internal | |
GPS antenna | Internal | |
SIM | Microsim | |
Indicator | 2 status LEDs | |
Memory | 1300 pcs | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP65 |
The device can be set to upload the position and status information of the vehicle to the backend at a certain time, certain period or at a certain time interval.
When the vehicles enters the GPRS blind area, the device will store the GPS data upon 15s interval, the track data will be saved at the shortest 15S interval, those data will be uploaded to the backend server once GPRS network recovered, minimum 1000 pcs of data can be stored.
If the device detects that the vehicle driving direction has certain angular deviation(default 15 degrees), the device will upload a packet extra to make sure the driving trace is more accurate.
If GPS is not available, the device will automatically switch to LBS mode, and acquire the LBS each 30s and upload the based information, the server shall interprets the specific location on the map.