

Add to Cart
NT08EF is 4G CatM1 Battery Powered Ultra - Rugged Magnetic Tamper Detect RV GPS Tracker , the strong magnetic and light sensor design is ideally for RV's and Rental Cars, the battery could last 10+ years. .
Features:
1. Ultra Rugged design
2. Global Connectivity
3. Wifi indoors tracking
4. Bluetooth gateway
5. GPS outdoors tracking
6. Bolt mount
7. Magnets
8. 20000mAh battery
Specifications:
Physical | Dimension | 154X82X30mm(L*W*H) |
Weight | 495±5g | |
Cellular | Communication module | Quectel BG95 M3 |
Frequency | Working frequency: Cat M1: LTE-FDD
B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD
B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B | |
GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
Processor | STM | |
Motion sensor | DA260 | |
Wifi position | Wifi 4.0 | |
Bluetooth | Bluetooth 5.0 | |
Power | Battery | Disposable Lithium-ion battery and (3.6V,20000mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current 107uA; | |
GSM antenna | Internal High Gain | |
GPS antenna | Internal High Gain | |
SIM | Microsim | |
Indicator | 2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure) | |
Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
Humidity | 5% ~ 95% (no fog) | |
Ingress Protection Rating | IP67 |
More features: |
• OTA commands from the backend
Since the wake up of the device is normally short before enter into sleep mode, it is hardly to receive SMS , to ensure the command sending efficiently, we suggest an OTA commands to be sent from the platform, when the device is online, the backend will automatic send this command, to make sure the commands is properly received.
• Temperature detect
The device built-in temperature sensor, it detects the temperature once the device is turned on, then will read it every 16 seconds. The temperature accuracy 95%.
• Wifi failure feature
After powering on the WIFI twice in a row, the serial port did not report any information, and followed the positioning packets it will report a WIFI failure alarm.
• Network and bands lock
P: Network priority
P=1 Lock GSM
P=2 Nbiot Priority,CAT-M Second,GSM final
P=3 CAT-M Priority,GSM Second,NB OFF ,Defaulted
P=4 Lock CAT-M
P=5 Nbiot Priority,GSM Second,CAT-M OFF
P=6 CAT-M Priority,NB Second,GSM OFF
P=7 Nbiot Priority,CAT-M Second,GSM OFF
BandNBiot: Nbiot Bands;ALL-Bands,Multiple bands are separated by half-width commas, for example:B1,B3,B5
BandCAT-M1: CAT-M1 Bands;ALL-Bands,Multiple bands are separated by half-width commas, for example:B1,B3,B5
When set this parameter, please restart the device to make it executed.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.