DN10~DN1200 1.5D Welded Pipe Fittings MS Long Radius Elbow STD 90 Degree

1.5D Welded Pipe Fittings MS Long Radius Elbow STD 90 Degree

ELBOW LR ANSI B.16.9 ASTM A234 WPB WELD, is widely used in kinds of industry and building areas all over the world.It can be used for shipbuliding,petroleum,chemical,gas,power,construction,etc.

ELBOW L/R ANSI B.16.9 ASTM A234 WPB WELD

Type :large-diameter carbon steel pipe elbow

Radius: Short radius carbon steel elbow

Degree:30.60. 90 degree Short radius carbon steel elbow

Application:shipbuliding,petroleum,chemical,gas,power,construction,etc

Product name: Elbow

Size: 1/4” to 48” Outside Diameter 13.7 mm to 1219 mm

Standard: ASTM/ANSI.B16.9 ASTM/ANSI B16.28 ASTM /ANSI B16.11 ASTM/ANSI B16.25 BS1965 BS1640

DIN 2605 DIN2615 DIN2616 DIN2617

GB 12459-90 GB/T13401-92 GB/T21635 GB/T21634

JIS B2311 JISB2312 JISB2313 JISB2316

ISO 3419-1981 ISO5251-1981

Material:A234 WPB, A105, A283-D, A135-A, A53-A, A106-A, A179-C, A214-C, A192, A226, A315-B, A53-B, A106-B, A106-C, A178-C, A210-A-1, A210-C.

Certificates: API5L ,ISO 9001:2008,SGS, BV, ccic

Wall thickness: SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100 SCH120, SCH160, XS, XXS

Surface Treatment: black paint, varnish, oil, galvanized

Marking: Standard marking, or according to your request. Marking Method: Spray white paint

Packaging: wooden case & pallet

Test: Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, hydraulic testing , X-ray Test.

About our factory:

Our Certificate:

Cangzhou Authentic Pipe Fitting Manufacturing Co., Ltd. is located in Mengcun County, the capital of pipe fittings in China and the center of pipe fitting manufacturing. It covers an area of 100,000 square meters and a building area of 50,000 square meters. Our company has a strong workforce. There are more than 200 employees, including more than 60 professional and technical personnel, with the ability to produce various pipe fittings.

The company has a number of pipe fittings manufacturing production lines, with independent pressing, machining, intermediate frequency hot pushing, cold forming, hot extrusion, heat treatment and other technologies. In addition, in order to ensure product quality, companies are paying more and more attention to the improvement of inspection equipment. Advanced equipment, along with corresponding testing capabilities, are constantly being used, such as chemical elemental analysis, metal testing, physical inspection, and non-destructive testing. In addition, we use advanced material composition analysis equipment - a continuous reading spectrum equipment can directly and accurately test the chemical composition of various metal materials.