CE ISO A5 39m Span Overhead Traveling Bridge Crane For Material Yards

CE ISO Approved Single Girder Overhead Travelling Bridge Crane Industrial Worshop Lifting Machine With Safety Device

Description:

The single girder travelling crane is our flexible crane for almost any application. Even in buildings with low ceilings effective material flow solutions can be achieved for loads of up to 20 tons and spans of up to 39 m. Normally safety clearances below ceilings are not required for single girder cranes within this load range. This allows the optimal use of existing space or can save additional building height costs.

The single girder traveling cranes adapt to different building applications due to their various main girder connection variants. Favorable crane dimensions help to reach optimal highest hook positions.

Santo has the mature technology on developing and producing cranes especially heavy duty.
Besides, we also provide customized service for your additional requirements.

Crane Structure:

On a single girder crane, the bridge consists of one girder beam supported on each side by an end truck. The trolley and hoist are most commonly underhung—meaning they run on the bottom flange of the bridge. The bridge itself can either be top running or under running in design.

Top Running Crane:
These cranes have no limiting capacity, meaning they can be built to go from small capacities to very large capacities. They include a rail installed on top of each runway, and the bridge wheels move on the rail instead of the bottom flange of the runway beam. These cranes are supported by the building structure or runway support columns, or sister columns, and are ideal for moving extremely heavy loads.

Under Running Crane:
Often called “underhung,” because the crane wheels are supported by the bottom flange of the crane runway beams acting as the crane rail. These types of cranes can allow you to maximize your facility’s floor space for the production and storage of material because they are supported by the ceiling trusses or the roof structure. Or, they can be designed to utilize an existing support structure (if adequate), or run on a newly-engineered support structure.

Application:

Single girder overhead cranes are often the cost-effective lifting solution for various applications and industries. Single girder cranes use less material and are more compact and lightweight than a double girder crane, which results in a significant cost-savings in material, freight, and installation. Also, because they only require one bridge beam, these systems typically have less deadweight, meaning they can utilize lighter runway systems and tie into the existing building support structure.

Standard Specification:

A single girder or double girder design will be one of the largest contributors to the complexity and overall cost of a new overhead crane system.

A bridge crane is a type of overhead crane that includes two or more overhead runways built into the building’s support structure. Bridge cranes have different configurations and can be comprised of one or two beams—more often referred to as a single girder or double girder design. Girders can be made of rolled steel or can be fabricated by welding the beams into a steel box design for added strength and rigidity.

Crane Advantage:

■ Single girder bridge cranes are often the most cost-effective lifting solution for various applications and industries.
■ Single girder cranes use less material and are more compact and lightweight than a double girder crane, which results in a significant cost-savings in material, freight, and installation.
■ Also, because they only require one bridge beam, these systems typically have less dead weight, meaning they can utilize lighter runway systems and tie into the existing building support structure.

■ Less expensive due to a simpler trolley design, reduced freight costs, simplified and faster installation, and less material for the bridge and runway beams
■ A most economical option for light to medium-duty cranes
■ Lower loads on the building structure or foundations due to a reduced deadweight. In many cases, it can be supported by the existing roof structure without the use of additional support columns.
■ Better hook approach for both trolley travel and bridge travel
■ Easier to install, service, and maintain
■ Ideal for workshops, warehouses, material yards, and manufacturing and production facilities
■ Lighter load on runway rails or beams means less wear on the beams and end truck wheels over time
■ Great for facilities with low headroom

Company Information:

Santo crane mainly dealing in researching, developing and producing the lifting machinery, port machinery, construction-use tower crane, reducer, etc.
The leading products of Santo widely used in Machinery, Metallurgy, Electric Power, Railway, Aerospace , Port, Petroleum, Petrochemical, etc, our products are serving the national key projects such as: the South-to-North Water Transfer Project, the West-East National Gas Transmission, the Three Gorges Hydropower Station, Jiuquan Satellite Lunching Center, Qinshan Nuclear Power Station, Hangzhou Bay Bridge, Beijing Olympic Games and so on, accelerate successfully the launch of Spacecraft Shenzhou-10 and Chang’e-3,our products have been exported to more than 69 countries like America, Japan, Russia, Korea, etc. In 2013 the annual sales revenue reached 6.669 billion, and the Overhead Traveling Crane and the Gantry Crane continue to hold the first position around the whole country

Reference Cases:

If you need this type single beam overhead crane, please tell us below details:

1. The lifting capacity that you need(ton)

2. The span that you need(The distance of wheel to wheel center)

3. The Max. lifting height from ground to hook center(m)

4. The power source standard(Voltage= V, 50/60Hz, 3phase)

It's not only loads that we transport, but also values, such as trustworthy cooperation.

Our success is based on a wide range of products, our high quality standards and a strong culture of innovation.

● Henan Santo Crane Co., Ltd, first established in 1984 was, at that time, our plants located in China Crane Hometown-Changyuan county, Henan province, covers over 510,000 square meters, have more than 10 production lines, and total assets of 8.7 million Yuan, the enterprise now boasts a staff of more than 2,500 people, including 350 people with middle or advanced professional title and more than 450 suits various kinds of manufacturing and checkout equipment. We have achieved ISO9001, ISO14001, OHSAS18000, TUV and CE certificates during the past decades.
● Santo has been a specialist in lifting, transporting, loading or unloading materials in Military Industry, Aeronautics and Astronautics, Food/Pharmaceutics, Nuclear Power/Energy, Tunnel Shields, Wind Power, Automobiles, Waste Disposal, Paper-making/Pulp, Engineering Machinery, Rail Transit, Metallurgy, Petrochemical Industry, Ships, Metal Processing, Mining, Logistics, Warehouse, Construction & Engineering and so on.
● Santo builds a complete range of overhead cranes, gantry cranes, jib cranes, port cranes, electric hoists, chain hoists, electric winch, transfer carts, boom lift, scissor lift and all crane accessories, including single girder, double girder, double leg, single leg, and cantilever styles for indoor or outdoor service. Capacities, spans and heights are virtually unlimited and customizable.
● We always aim at the decreasing of your staff cost, workshop construction cost, and highly improving the working efficiency. We work closely with clients to improve their production processes, providing solutions that are integrated, sustainable and optimised, both technically and economically.
● Our machine series combined good quality with reasonable prices. We can provide a full range of professional solution supporting and satisfied life cycle service.

Our Vision
To be the leading Integrated Solution Provider for Crane and Components

Our Mission
Not only Lift your products and business, but also help you to achieve business success.

Our Value
Profession: Observe professional ethics, abide by rules and regulations, and fulfill our duties.
Integrity: To be trustable and faithful is the code of conduct of every employee business ethics of the company
Innovation: Continuous improvements. Endeavor innovation in product and service, technology and management to deliver high value added products and services.
Win-Win: Dedicated to meet customers’ needs and satisfaction and contribute to customers’ long term success.

Industries Application:

So, whatever your industry is, we have the best crane solution for you whenever you need overhead crane services. We have a wide variety of cranes for you to choose from with a guarantee of satisfaction.

Serving many types of industries has given SANTOCRANES a broad list of experiences.

Henan Santo Crane Co.,Ltd. locates in Xinxiang city which is the crane hometown in China. Our trademark is " Santo crane ", and our company's operation principle is "Let The World Relaxed". The scope of supply covers the complete range of R&D, consulting, feasibility studies, design, engineering, manufacturing, shipping, installation, training and after sales services. New high-tech overhead crane, electric hoist, gantry crane, port crane, truck crane, electric winch, scissor lifting table, aerial work platform, cargo lift, and crane accessories, all of our lifting equipments and our innovation are built on the basis of safety of users. Our plant owns more than thirty years manufacturing experience since 1984, and during the passed thirty years, we has built up an impressive track record of good performance, reliability and delivery of high quality cranes and services to our clients. Our commitment to Safety, Quality, Cost-effective, On-time delivery has enable the company to grow stronger and stronger. We have achieved ISO9001, ISO14001, OHSAS18000, TUV and CE certificates during the past years.

Our products are widely used in energy, metallurgy, transportation, heavy machinery, Nuclear power, hydropower, aviation and military projects a series of environment-friendly machinery. All of the products can be customized as your demand. We attach importance to the development of overseas markets, we have build a good business relationships with global companies. We are the market leaders in China and a preferred brand globally.

Our advantages:

1. Factory establish in -- 1984. With more than 30 years fabrication experience, we are professional.
2. Factory area -- 510000m2. Large production capacity, help customer improve the factory construction time and saving more cost.
3. Exporting to more than 90 countries. Rich exporting experience make us provide a better exporting service, and help our customer avoid more troubles during every step.
4. Rich experience cooperate with different application industry -- we can provide more reasonable suggestion during the process of solutions confirm. Help our customer get a best money performance equipment.
5. 1 year warranty, no worry about the aftersale service.
6. Provide Overseas installation. To make sure the crane can service better for the working.

7. Advanced processing equipment and owns strict quality management systemA. To ensure a high quality crane for our clients.

Focus on the benefits for our customers – high safety, maximum reliability and excellent performance

Quality, service and customer satisfaction are there every day where they belong: At the very top! As a lift equipment manufacturer with over 32 years experience, SANTOCRANES has set up a perfect sales network and after-sales service system. We have 42 sales managers and 10 engineers especially for exporting business. We believe with our rich experience, we can provide you a professional solution supporting and satisfied service.
There are many good reasons for quality and service at SANTOCRANES. The two most important ones: Our qualified employees and the many years of know-how in crane systems are solid guarantees for optimum service at all times.

We know the wishes and requirements of our customers and consistently direct our efforts accordingly. Focusing on the customer is also clearly visible in our day-to-day operations. Our first concern is maximum availability of the crane systems. Our lifting equipment professionals help you reduce faults and downtimes through targeted preventive maintenance.

1.Pre-sale services

a: Design customised project for clients.

b: Design and manufcture products according to clients special requirement.

c: Train technical personnel for clients.

2.Services during the sale

a: Help clients to find reasonable freight forwarders ahead of delivery.

b: Help clients to draw solving plans.

3.After-sale services

a:Assist clients to prepare for the construction scheme.

b:Install and debug equipment.

c:Train the first-line operators.

d: Examine equipment.

e: Take initiative to eliminate the troubles immediately.

f: Provide techical exchanging.

It all comes down to your success, which is why there are cranes for every purpose – all designed for long life at maximum efficiency. They give you not only the most capacity for the weight, but also the speed, flexibility and precision to manage the toughest of tasks. And they make no compromises on safety or quality. We are dedicated to continuously finding new ways to improve our products and services to better meet customer needs. We offers solutions for different situations. We believe SANTOCRANES will be your reliable partner in China to meet your business challenge and solve your lifting problems.

Our promise

1.On time delivery time
2.Competitive price with best quality
3.Provide custom design according to customers request
4.12 months product warranty
5.24 hours on phone service
6.After sale service:Spare parts service guaranteed, absolutely fast and efficient able to reply in real time to customer's need.

We never stop listening - We never stop learning - We never stop innovating