

Add to Cart
Portable 10g Ozone Generator Machine Car Air Flush Sterilization
When should I get an ozone treatment?
An ozone treatment by your detailer is done using an ozone generator. Typically, this process is done by sending specific-wavelength UV light at oxygen atoms. The generator will be placed in your vehicle for as long as necessary to remove any odor. Ozone odor removal is permanent, provided you have removed the source of the smell. Your detailer will thoroughly clean your car before the ozone treatment. It’s important to make sure that the cause of any smell is taken care of. In the case of mildew, make sure you have dealt with the source of the dampness as well.
One of the biggest causes of vehicle odors that can’t be removed is tobacco smoke. Phenol, an invisible chemical present in secondhand smoke, is responsible for irritation of the eyes and respiratory tract. An ozone treatment will completely oxidize any remaining phenol gas, effectively neutralizing the odor. In this case, the odor will not return because the molecules have been destroyed rather than masked or filtered.
Ozone is a gas which will dissipate after about half an hour after treatment, so there is no risk of exposure from your vehicle. Your detailer will be sure to sufficiently air out your vehicle before returning it to you.
Ozone Generator Machine
Ozone disinfection sterilization machine for the goods utilizing by light discharge principle of ozone to the air as prime material, creeping discharge technology jerks release of high concentrations of ozone. Ozone is one of the strongest known oxidant, at certain concentrations, it can quickly kill off the water and air in a variety of harmful bacteria. It is recognized as the world's a broad spectrum of potent bactericidal disinfectant.
Advantage:
Time for running:
Yield(g/h) | 5g/10g/15g/20g/30g/40g/50g |
power(w) | 80w/100w/120w/130w |
Input voltage | 110-220V/50-60HZ |
cooling method | Air-cooled |
Dimensions (cm) | 21.5*17*14/ 27.5*18.5*15 or custom |
Packing size (cm) | 33.2*23.3*23.2 |
colour | White, blue, orange, green, yellow, purple or custom |
weight(kg) | 2.6kg |
working environment | Ambient temperature ≤ 45 ° C, relative humidity ≤ 80% |
way to control | 0-90min countdown |
MOQ | 30PCS |