Product Details
LionRock Generator sets are suitable for commercial, industrial,
telecom, Data Centre and infrastructure application.
Standard features
- Set mount radiator with engine driven fan
- Cooling system standard for 40°C ambient
- Anti-vibration mounts between engine / alternator and baseframe
- Baseframe fuel tank
- Protective grille for fan and rotating parts
- Exhaust bellow and industrial silencer
- 24VDC starter motor and battery
- Generator sets are CE Certified
- Standard 3P manual output breaker
- Coolant and oil drains with valve
- Each LionRock® generating set will go through factory test at 0%,
25%, 50%, 75%, 100% and 110% of rated capacity
Standard and Quality
- All generator sets comply with international standards including
ISO8528, ISO3046, IEC60034, BS5000
- Manufacturing standard certified to ISO9001, ISO14001, ISO18001
Rating definition as per ISO8528
- Prime - Output available with varying load for an unlimited time.
Average power output is 70% of the prime power rating. Typical peak
demand is 100% of prime rated kWe with 10% overload capability for
emergency use for a maximum of 1 hour in 12.
- Standby - Output available with varying load during a normal power supply
failure. Average power output is 80% of the standby power rating.
Typical annual operating time less than 500hours. No overload is
available.
Power Ratings at 0.8 power factor |
Voltage(V) | Standby |
Prime
| Maximum current(Amp) |
kVA | kW | kVA | kW |
380/220 | 2500 | 2000 | - | - | 3798 |
400/230 | 2500 | 2000 | - | - | 3608 |
415/240 | 2500 | 2000 | - | - | 3478 |
Fuel Consumption |
Load (%) | | 100 | 75 | 50 |
(L/h) | 500 | - | - | - |
Dimensions | Weight | Fuel Tank |
Length (L) | | Height (H) | Dry | Baseframe |
mm | mm | mm | kg | litres |
7200 | 2500 | 2750 | 15500 | N/A |
Technical data
Electrical measurement
- Voltage (P-P, P-N)
- Current
- Frequency
- Power factor
Energy Meter
- kW
- kWh
- kVA
Mechanical measurement
- Water temperature
- Oil Pressure
- Engine speed
- Running hours
- Number of start
- Battery voltage
Protection
Mechanical
- Overspeed
- High coolant temperature
- Low oil pressure
- Start up failure lock out
- Emergency Stop
- Over and under frequency
- Over and under voltage
- Overload
- Overcurrent
- Power factor
- Current unbalance
Communication
- USB (Programming)
Control
- Auto/Manual
- Start/stop button
- Alarm/fault acknowledge
- Menu button
- Display navigation buttons
Features
- Automatic mains failure
- Fuel tank content in %
- Oil temperature gauge
- Modbus SNMP
- Modbus TCP/IP Ethernet
- Extended input/output modules
- RS485 Modbus
Alternative control modules
- Wide range of control module options including:
ComAp
Deepsea
Woodward
Smartgen etc.
- Multiple generators parallel as well as parallel with mains power
Dimensions and Weights
Length (L): mm | 12192 |
Width (W): mm | 3000 |
Height (H): mm | 3600 |
Weight: kg | 22142 |
Fuel Tank Capacity: litres | N/A |
Sound Pressure Levels
75% Load | |
Prime: dBA@1m | 96 |
dBA@7m | 89 |
dBA@15m | 84 |
Stainless steel locks and handles on doors
- Black zinc die cast hinges on doors proven to withstand extreme
weather conditions
- Zinc plated standard fastener with stainless steel option
- Enclosure made of sheet steel pre-treated with zinc phosphate
prior to polyester powder coating
Secure, lockable doors prevent unauthorized access to control
panel, fuel fill and battery
- Emergency stop buttons mounted on enclosure exterior surface
- All moving parts including Cooling fan, charging alternator, belt
are fully guarded
Hinged doors of 180 deg swing on both sides of the enclosure for
easy access and maintenance
- Lube oil and water drains hosed to baseframe side to exterior
- Removable end panels allow access to radiator, exhaust silencer
and alternator rear
- Exhaust silencer inside enclosure
Easy Transportable
- Lifting points on both side of baseframe
- Anchor and drag points at baseframe ends
Company Profile
Manufacturer of world class product with the best value of power
products and Electrical and Mechanical turnkey solution.
- Headquarter in Hong Kong with manufacturing facility in Dongguan
of China and Nigeria
- A strong elite team with best technology know how and experience
of implementation all around the world
- Over 20 years experience and products cover over 70 countries
worldwide
- Form strategic partnership with major global conglomerate and
enterprises
- Holder of various patents and leader of the industry
- Leading Hong Kong companies participating in one belt one road
3Tech Corporate Limited was established in 2002, formerly known as
3Tech (HK) Ltd. in 1998. At the beginning, 3Tech was mainly engaged
in the supply and after-sales service of diesel generating sets in
the Greater China region. Since 2002, we have established a local
E&M engineering team in Hong Kong to participate in E&M
projects of HKSAR Government, public and private organizations.
3Tech has been actively developing its business in overseas
communication industry since 2003, with its own product brand
LionRock and Smart Control and Monitoring System OwlEye.
LionRock products have evolved from diesel generating set products
to communication base station energy solutions, seamlessly
connecting to the burgeoning 5G communication infrastructure. It
extends from energy products to edge computing infrastructure
products.
OwlEye is the foundation platform for the future IoT. The products
are already widely used by different multinational operators around
the world.
Our current power energy solutions provide a full range of power
equipment that is simple, efficient, reliable and capable of
meeting various output capacities for different areas of
construction projects, such as power construction or transportation
construction applications.