Automatic Mains Failure AC YUCHAI 50Hz Diesel Generating Sets
LionRock Generator sets are suitable for commercial, industrial,
telecom, Data Centre and infrastructure application.
Standard features
- Set mount radiator with engine driven fan
- Cooling system standard for 40°C ambient
- Anti-vibration mounts between engine / alternator and baseframe
- Baseframe fuel tank
- Protective grille for fan and rotating parts
- Exhaust bellow and industrial silencer
- 12/24VDC starter motor and battery
- Generator sets are CE Certified
- Standard 3P manual output breaker
- Coolant and oil drains with valve
- Each LionRock generating set will go through comprehensive
factory test including full load test to 110%
Standard and Quality
- All generator sets comply with international standards including
ISO8528, ISO3046, IEC60034, BS5000
- Manufacturing standard certified to ISO9001, ISO14001, ISO18001
Rating definition as per ISO8528
- Prime - Output available with varying load for an unlimited time.
Average power output is 70% of the prime power rating. Typical peak
demand is 100% of prime rated kWe with 10% overload capability for
emergency use for a maximum of 1 hour in 12.
- Standby - Output available with varying load during a normal
power supply failure. Average power output is 80% of the standby
power rating. Typical annual operating time less than 500hours. No
overload is available.
Power Ratings at 0.8 power factor |
Voltage(V) | Standby |
Prime
| Maximum current(Amp) |
kVA | kW | kVA | kW |
380/220 | 18 | 14.4 | 16 | 12.8 | 27 |
400/230 | 18 | 14.4 | 16 | 12.8 | 25 |
415/240 | 18 | 14.4 | 16 | 12.8 | 25 |
Fuel Consumption |
Load (%) | | 100 | 75 | 50 |
(L/h) | 5.6 | 5.0 | 3.9 | 2.7 |
Dimensions | Weight | Fuel Tank |
Length (L) | | Height (H) | Dry | Baseframe |
mm | mm | mm | kg | litres |
1500 | 800 | 1200 | 550 | 50 |
Technical data
Mechanical measurement
- Water temperature
- Oil Pressure
- Engine speed
- Running hours
- Number of start
- Battery voltage
Electrical measurement
- Voltage (P-P, P-N)
- Current
- Frequency
- Power factor
Communication
- USB (Programming)
Energy Meter
- kW/kWh/kVA
Protection
- Overspeed
- High coolant temperature
- Low oil pressure
- Start up failure lock out
- Emergency Stop
- Over and under frequency
- Over and under voltage
- Overload
- Overcurrent
Control
- Auto/Manual
- Start/stop button
- Alarm/fault acknowledge
- Menu button
- Display navigation buttons
Protection
- Overspeed
- High coolant temperature
- Low oil pressure
- Start up failure lock out
- Emergency Stop
- Over and under frequency
- Over and under voltage
- Overload
- Overcurrent
Control
- Auto/Manual
- Start/stop button
- Alarm/fault acknowledge
- Menu button
- Display navigation buttons
Features
- Automatic mains failure
- Fuel tank content in %
- Oil temperature gauge
- Modbus SNMP
- Modbus TCP/IP Ethernet
- Extended input/output modules
- RS485 Modbus
Alternative control modules
- Wide range of control module options including:
ComAp
Deepsea
Woodward
Smartgen etc.
- Multiple generators parallel as well as parallel with mains power
Soundproof Canopy
Dimensions and Weights
Length (L): mm | 1800 |
Width (W): mm | 920 |
Height (H): mm | 1400 |
Weight: kg | 730 |
Fuel Tank Capacity: litres | 50 |
Sound Pressure Levels
75% Load | |
Prime: dBA@1m | 78 |
dBA@7m | 66 |
dBA@15m | 60 |
Stainless steel locks and handles on doors
- Black zinc die cast hinges on doors proven to withstand extreme
weather conditions
- Zinc plated standard fastener with stainless steel option
- Enclosure made of sheet steel pre-treated with zinc phosphate
prior to polyester powder coating
Secure, lockable doors prevent unauthorized access to control
panel, fuel fill and battery
- Emergency stop buttons mounted on enclosure exterior surface
- All moving parts including Cooling fan, charging alternator, belt
are fully guarded
Hinged doors of 180 deg swing on both sides of the enclosure for
easy access and maintenance
- Lube oil and water drains hosed to baseframe side to exterior
- Removable end panels allow access to radiator, exhaust silencer
and alternator rear
- Exhaust silencer inside enclosure
Easy Transportable
- Lifting points on both side of baseframe
- Anchor and drag points at baseframe ends