Smps Switch Mode Embedded Power Supply 50kg For Fiber Optic Network OEM

Brand Name:LionRock
Model Number:TEP 400H2/48
Minimum Order Quantity:negotiate
Delivery Time:negotiate
Payment Terms:TT
Place of Origin:Dongguan China
Contact Now

Add to Cart

Active Member
Location: Hong kong China
Address: (Headquarter) Room 09, 12/F., Tower B, Hunghom Commercial Centre, 37 Ma Tau Wai Road, Hung Hom, Kowloon, Hong Kong.
Supplier`s last login times: within 24 hours
Product Details Company Profile
Product Details

Batteries Monitoring and Management Embedded Switch Mode Power Supply


Introduction

TEP 400H2/48 is a DC distribution unit which be used for solar / diesel / grid hybrid scenarios. It contains up to 8 pieces of HFSM modules, 4 pieces of solar modules, DC power distribution board controller SC501 etc. The function is collecting multiple power input from solar, diesel, and grid, and converts it to DC output for loads.


Features

- PFC technique features the system high efficiency, energy-saying and up to 0.99 power factor
- Supports hot-swap for modules of HFSM, MPPT
- Can be forced power on by pressing the battery switch when only the battery works
- Detects BLVD & LLVD signals, and detects signals of battery and load loop disconnection
- Integrated SPD to provide reliable protection for DC power, monitoring and communication ports
- Detects current signals of batteries, loads and other energy inputs
- Batteries monitoring and management enables backup batteries well maintained
- Management priority: solar > grid > battery > DG


Applications

- Fiber optic network
- Access network
- Transmission equipment
- Mobile communication
- Satellite communication ground station


Scenarios
- Solar / diesel / grid hybrid system


General Specification

SystemDimension (W x D x H)483mm x 400mm x 400mm
Weight50 kg
Installation ModeIn a 19-inch rack
Cabling ModeFrom the top, right & left
Maintenance ModeFrom the front
InputAC Input200-240 / 346-415Vac, three-phase, 50/60Hz, Max. 35A
DC1 Input-40Vdc to -60Vdc, Max. 200A
Solar Input100Vdc to 430Vdc, Max. 15Ax4
OutputVoltage-42Vdc to -58Vdc (typical: -48Vdc)
CapacityRectifier Max. 400A
Solar Max. 100A (optional: 200A)
Output DistributionBattery Branch2x200A breaker
LLVD Branch2x80A MCB, 2x63A MCB
BLVD Branch1x63A MCB, 4x32A MCB, 1x16A MBC
Surge ProtectionAC Input40kA (8/20 µs)
DC Output20kA (8/20 µs)
EnvironmentOperating Temperature-40ºC to +65ºC (load needs derating to 80% at +45ºC to +65ºC, system can start at -40ºC to -33ºC without damage)
Storage Temperature-40ºC to +70ºC
Operating Relative Humidity5% to 95% (no condensation)
Altitude0 to 2000 m (1ºC per 200m temperature derating from 2000 to 4000m)

Remark: MPPT: Maximum Power Point Tracking; HFSM: High Frequency Switch Module


China Smps Switch Mode Embedded Power Supply 50kg For Fiber Optic Network OEM supplier

Smps Switch Mode Embedded Power Supply 50kg For Fiber Optic Network OEM

Inquiry Cart 0