Terminator 4 Pin M12 Female Connector Waterproof With 120 Ohm Resistor
Brand Name:CABLEFORCE
Certification:UL Certified, CUL Certified, CE/ EMC, IP67, IP69K
Model Number:MC04T2LSAP
Minimum Order Quantity:100
Delivery Time:2~3 weeks
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Dongguan Guangdong China
Address:
Floor 4th. Building 2, No. 2 of North 3 Road Tingshan Plaza, Houjie Town, Dongguan City, 523962, Guangdong Province, China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Terminator M12 Female Circular Connector Waterproof With 120 Ohm
Resistor
Connector Technical Data | |||||||||
| Part No. | MC04T2LSAP | ||||||||
| Connectors No. | 4Pin | ||||||||
| Application | Sensors, Actuators, Encoders, Servo motors | ||||||||
| Over-molding | TPU | ||||||||
| Rated Temperature | Flexible: -25℃~+80℃, Static: -40℃~+80℃ | ||||||||
| Contact Carrier | PA66+GF | ||||||||
| O-ring | FKM/Silicon O-Ring | ||||||||
| Insulation Resistance | ≥100MΩ | ||||||||
| Contact Resistance | ≤5mΩ | ||||||||
| Termination | Soldering | ||||||||
| Rated current | 4A | ||||||||
| Screw Nut | PA66+GF | ||||||||
Description
The M12 terminator is a M12 connector molded with a 120 ohm
resistor inside, located at each end of the trunk line of
DEVICENET, PROFIBUS DP, CANopen as well as NMEA 2000. Proper
termination helps ensure signal integrity across the entire length
of the cable.
CABLEFORCE Products Features
● IP67 IP68 IP69 and UL approvals
● Plug Mating Life: 500 times
● Warranty: 3-years quality guarantee period
● 4-Pole, 5-Pole available for both male or female connector
● Application : Sensors, Actuators, Encoders, Servo motors
● Current rating : 2A,4A
● Operation voltage : 30V,60V,250V
● RoHS, REACH compliant.
FAQ
● What does CAN termination do?
Termination prevents reflections that might cause communication
failure as a result of ringing (oscillation) on the bit edges.
Reflexions can be particularly strong when the signal reaches the
end of the cable, which is why termination adapters are placed at
the ends.
● Why is a termination resistor needed?
In electronics, you'll encounter termination resistors when you're
working with differential pair signals, such as the RS 485. It is a
simple component that ensures signal integrity on the bus,
especially when high-speed transmission is involved. Furthermore,
termination resistors are used to avoid signal reflections.
● Why do we use 120 ohm termination resistor?
For avoiding reflection we use Transmission Line theory. For the
High speed CAN bus the maximum length is 40m, with 1 Mbps speed and
maximum of 30 nodes. So here by using 120 ohms resistor as
terminating resistor we can avoid all the reflections easily
without fail.
Terminator 4 Pin M12 Female Connector Waterproof With 120 Ohm Resistor
Inquiry Cart
0