Terminator M12 8 Pin Male Connector A Code M12 8 Pole Connector With 120Ω Resistor
Brand Name:CABLEFORCE
Certification:UL Certified, CUL Certified, CE/ EMC, IP67, IP69K
Model Number:MC08T1LSAB
Minimum Order Quantity:100
Delivery Time:2~3 weeks
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Dongguan Guangdong China
Address:
Floor 4th. Building 2, No. 2 of North 3 Road Tingshan Plaza, Houjie Town, Dongguan City, 523962, Guangdong Province, China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
M12 Terminator Circular Connector 8 Pin Male A Code With 120Ω
Resistor
Connector Technical Data | |||||||||
| Part No. | MC08T1LSAB | ||||||||
| Connectors No. | 8Pin | ||||||||
| Application | Sensors, Actuators, Encoders, Servo motors | ||||||||
| Contact plating | Au (Gold) | ||||||||
| Rated Temperature | Flexible: -25℃~+80℃, Static: -40℃~+80℃ | ||||||||
| Contact Carrier | TPU+GF | ||||||||
| O-ring | FKM/Silicon O-Ring | ||||||||
| Insulation Resistance | ≥100MΩ | ||||||||
| Contact Resistance | ≤5mΩ | ||||||||
| Termination | Soldering | ||||||||
| Rated current | 2A | ||||||||
| Protection Degree | IP67,IP68 | ||||||||
Description
The Terminator, a M12 connector molded with a 120 ohm resistor
inside it, located at each end of the NMEA 2000 backbone or other
devices cable termination. Proper termination helps ensure signal
integrity across the entire length of the boat backbone.
CABLEFORCE Products Features
● IP67 IP68 IP69 and UL approvals
● Plug Mating Life: 500 times
● 360° shielded or non shielded versions are available
● Warranty: 3-years quality guarantee period
● Sturdy metal coupling screws with anti-vibration design, 48 hours
Salt Spray Test
● Application : Sensors, Actuators, Encoders, Servo motors
● Current rating : 2A
● Operation voltage : 30V
● RoHS, REACH compliant.
FAQ
● CAN you use 120 ohm termination resistor?
It is well known, in the CAN community at least, that every CAN and CAN FD network should be terminated with a 120 Ohm resistor at each end of the bus. ... If your termination is correct, you should read approximately 60 Ohms (two 120 Ohm resistors in parallel produce a resistance of 60 Ohms).
● Why do we use 120 ohm termination resistor?
For avoiding reflection we use Transmission Line theory. For the
High speed CAN bus the maximum length is 40m, with 1 Mbps speed and
maximum of 30 nodes. So here by using 120 ohms resistor as
terminating resistor we can avoid all the reflections easily
without fail.
Terminator M12 8 Pin Male Connector A Code M12 8 Pole Connector With 120Ω Resistor
Inquiry Cart
0