Flexo Printing Folding Gluing Machine Carton Production Line Accurate And Neat Stacking

Flexo Folding Gluer Carton Production Line

• Introduction
• 1. All paper conveying belts can be moved independently. The paper conveying belts are equipped with paper pressing wheels, fans, and brushes to clean up the waste paper to the greatest extent. Guide wheel device, upper and lower belt clamping transmission. Electric left and right walking, easy to adjust the size
• 2. Gluing wheel: Made of stainless steel, more durable and corrosion-resistant. The glue hopper is equipped with linear guides, making position adjustment more convenient and accurate.
• 3. Folding part: The main function is to fold the carton down, and use the correction plate to correct the pressure line for the second time to fold the carton into a standard box.
• 4. For molding cleaning, if the scraping part and folding part have not been cleaned up, the waste paper scraps will be cleaned again.

• 5. Pat the parts together: Pat the points together, and push them out with an accurate number through counting light, counting, and correction.
• 6. Output part: After pushing out, the above paper holder presses smoothly for output.

• 7. Packaging Department: Adopting counter-pushing paper technology, the lifting speed of left and right operations is doubled, and both single and double lanes are available.
• 8. Control panel; adopts PLC control and has functions such as zeroing and memory. (PLC combined with touch screen control can be selected)
• 9. Electrical configuration:

Main control computer PLC: Panasonic

Touch screen: Kunlun Tongtai

Switching power supply: MEAN WELL

Frequency converter: Delta

Intermediate relay: Omron

Circuit breaker: Siemens

Contactor: Siemens

Photoelectric switch: Shanghai Industrial Group

Terminal block: Chint

• 10. The controller panel for each action of the machine controls the left and right movement, the rise and fall of the paper platen, etc.

Operating principle

The carton gluing section and the printing and die-cutting section are connected, used, and operated synchronously so that the cardboard that has been printed, die-cut, or slotted can smoothly enter the carton gluing section. The baling machine is connected to the carton gluing section. When the cardboard completes gluing, folding, and correction, The pallets are transported to the baler. The baler has a photoelectric sensor and transmits the signal to the PLC. The PLC controls the operation of each part of the baler.

Machine parameter

The maximum speed: 320 meters/minute

Maximum number of packages launched: 20 packages

Maximum cardboard size: 700mm*500mm

Minimum cardboard size: 195mm*105mm

Maximum width of cardboard (including swing cover): 1100mm

Minimum width of cardboard (including swing cover): 240mm

Maximum stacking height: 350mm

Minimum stacking height: 80mm

Maximum quantity per pack: 50 pcs

Minimum quantity per package: 10 pcs

Belt: Siglin (China-Germany joint venture)

For the marked areas in the picture, pay attention to regular refueling and maintenance "once every half a month" to ensure the normal operation of the machine and a longer service life of the machine.

Foundation diagram

Attachment 1

Items to be prepared by the buyer:

1. When the machine arrives, prepare the forklift, five to eight tons, long fork.

2. Prepare relevant locations.

3. Prepare the main power cord, gas.

4. Help from security personnel.

5. Prepare the cardboard and test the machine at any time.

Attachment 2

Safe operation:

1. Before taking up work, you must wear work clothes and work shoes, fasten the buttons and cuffs, and do not put items in your pockets that are easy to fall.

2. After the crew arrives at work, check that there are no people or debris within the operating range of the equipment. The protective cover on the equipment must be intact and not loose.

3. Before starting the equipment, the bell should ring and the alarm should be sounded. Only after re-confirming that no one is in the operating range of the equipment can it be started up.

4. When the equipment is in operation, it is strictly forbidden to touch all operating working surfaces with hands, and maintenance and wiping work are not allowed. It is not allowed to cross the running parts.

5. Crew members should strictly adhere to their posts according to the division of labor, and are prohibited from skipping posts or leaving their posts without permission. They should always pay attention to the operation of the equipment.

6. When the equipment is in operation, it is strictly forbidden to touch all operating working surfaces with hands, and maintenance and wiping work are not allowed. It is not allowed to cross the running parts.

7. Crew members should strictly adhere to their posts according to the division of labor, and are prohibited from skipping posts or leaving their posts without permission. They should always pay attention to the operation of the equipment.

If an abnormality is found, shut down the machine immediately.

8. When working, no one is allowed to play around the equipment or make loud noises.

9. During the work process, the work place should be kept clean and smooth. Make sure there is no clutter around the device. Tools and parts should be placed in designated locations.

10. The operator of this machine should be familiar with the functions and locations of the main buttons of the equipment. If an accident occurs, anyone can press the emergency stop switch.

Cangzhou Gerun Carton Machinery Co., Ltd. is a professional company engaged in the design and manufacture of carton machinery. The company is located in Cangzhou Dongguang, the northern carton machinery production base. Over the years, it has always been a leader in research, development and production.

Our Company is a technology-based enterprise mainly engaged in corrugated box machinery, dominated by corrugated box production lines and high-speed ink printing machines, integrating investment, R&D, design, and manufacturing. It has a systematic and large-scale industrial structure. It has developed into a leader in packaging machinery with leading technology and excellent performance.

Our Company has modern mechanical processing equipment and professional technicians to provide users with a guarantee for the production of packaging equipment with reasonable design and qualified quality. In recent years, in order to meet the needs of foreign markets, we pay more attention to the development and production of new high-tech products. Due to the continuous increase of product types and stable quality, we can achieve zero product inventory and no complaints from users.

On the premise of ensuring product quality and service, our company pays more attention to corporate reputation, and always adheres to the principle of "leading technology, creating quality", starting from the interests of customers. Provide high-quality products and services for new and old customers, and win the trust of carton manufacturers!