Add to Cart
Original USA Dwyer Magnehelic series 2000-750pa differential pressure gauge 0-700pa
Indicate Positive, Negative or Differential, Accurate within 1%
Filter Monitoring
Air Velocity with Dwyer Pitot Tube
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication
Service:Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Housing:Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:-20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
Mounting Orientation:Diaphragm in vertical position.
Process Connections:1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Standard Accessories:Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws.
Brand name | Dwyer |
Type | differential pressure gauge |
Accuracy | ±2% |
Temperature Limits | 20 to 140°F |
Enclosure Rating | IP67 |
Connection | 1/8 NPT |
Weight | 0.55kg |
Size | 115mm |