Fluke 725S Multifunction Process Calibrator Brand new in stock
Brand Name:FLUKE
Certification:CE
Model Number:Fluke 725S
Minimum Order Quantity:1
Delivery Time:2-3days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Wenzhou Zhejiang China
Address:
58 Longhe Road, Liushi Town,Wenzhou, Zhejiang, China 325604
Supplier`s last login times:
within 14 hours
Product Details
Company Profile
Product Details
FLUKE process calibrator Fluke-725 /APAC/EMEA 725/CN 725S/CN 726/CN
Specification
Measurement Accuracy | ||
Voltage DC | 30 V: 0.02% 2 counts (upper display) 30 V: 0.02% 2 counts (lower display) 100 mV: 0.02% 2 counts -10 to 75 mV: 0.025% 1 count (via TC connector) | |
Current DC | 24 mA: 0.02% 2 counts | |
Resistance | 0 to 400 Ω: 0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire) 401 to 1500 Ω: 0.5 Ω (4-wire), 1 Ω (2- and 3-wire) 1500 to 3200 Ω: 1 Ω (4-wire), 1.5 Ω (2- and 3-wire) | |
Frequency | 2 to 1000 CPM: 0.05% 1 count 1 to 1100 Hz: 0.05% 1 count 1 to 10 kHz: 0.05% 1 count Sensitivity: 1 V peak-to-peak-minimum | |
Pressure | Accuracy from 0.025% of range using any of 29 pressure modules (for
detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure. | |
Source Accuracy | ||
Voltage DC | 100 mV: 0.02% 2 counts 10 V: 0.02% 2 counts -10 to 75 mV: 0.025% 1 count (via TC connector) | |
Current DC | 24 mA (source): 0.02% 2 counts 24 mA (simulate): 0.02% 2 counts | |
Resistance | 15 to 400 Ω: 0.15 Ω (excitation current 0.15 to 0.5 mA), 0.1 Ω
(excitation current 0.5 to 2 mA) 401 to 1500 Ω: 0.5 Ω (excitation current 0.05 to 0.8 mA) 1500 to 3200 Ω: 1 Ω (excitation current 0.05 to 0.4 mA) | |
Frequency | 2 to 1000 CPM: 0.05% 1 to 1100 Hz: 0.05% 1 to 10 kHz: 0.25% Waveform: 5 V p-p squarewave, -0.1 V offset | |
RTDs and Thermocouples | ||
Measure Accuracy | NI-120: 0.2°C PT-100 (385): 0.33°C PT-100 (393): 0.3°C PT-100 (JIS): 0.3°C PT-200 (385): 0.2°C PT-500 (385): 0.3°C PT-1000 (385): 0.2°C Resolution: 0.1°C J: 0.7°C K: 0.8°C T: 0.8°C E: 0.7°C R: 1.8°C S: 1.5°C B: 1.4°C L: 0.7°C U: 0.75°C N: 0.9°C Resolution: J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F XK: 0.6°C BP: 1.2°C | |
Source Accuracy | NI-120: 0.2°C PT-100 (385): 0.33°C PT-100 (393): 0.3°C PT-100 (JIS): 0.3°C PT-200 (385): 0.2°C PT-500 (385): 0.3°C PT-1000 (385): 0.2°C Resolution: 0.1°C Accuracy stated for 4-wire measurement J: 0.7°C K: 0.8°C T: 0.8°C E: 0.7°C R: 1.4°C S: 1.5°C B: 1.4°C L: 0.7°C U: 0.75°C N: 0.9°C Resolution: J, K, T, E, L, N, U: 0.1°C, B, R, S: 1°C XK: 0.6°C BP: 1.2°C | |
Functions | ||
Ramp | Source functions: Voltage, current, resistance, frequency,
temperature Ramps: Slow ramp, fast ramp, 25% step-ramp | |
Loop Power | Voltage: 24 V Accuracy: 10% Maximum current: 22 mA, short circuit protected | |
Step | Source functions: Voltage, current, resistance, frequency,
temperature Steps: 25% of range, 100% of range | |
General Specifications | ||
Environmental | Operating temperature: 14 to 131°F (-10 to 55°C) Storage temperature: -4 to 159.8°F (-20 to 71°C) Operating altitude: 9842.52' (3000 m) | |
Agency Approvals | EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 | |
Battery | Type: 4 x AA alkaline batteries Replacement: Separate battery compartment, accessible without breaking calibration seal | |
Side Port Connections | Pressure module connector, also used for remote real-time
programming | |
Dimensions | 5.1 x 9.3 x 2.4" (130 x 236 x 61 mm) | |
Weight | 1.43 lbs (0.65 kg) | |
Fluke 725S Multifunction Process Calibrator Brand new in stock
Inquiry Cart
0