Multi-functions video&telemetry&RC link in one(6800mAh 300mW-2W）

V40 multi-function digital transmission device integrates a variety of video and data ports,including HDMI,AV,LAN video input interfaces,3 serial ports(TTL&RS232&RS485) ,2 SBUS ports. It supports point to point,point to multi-point communication,the center node can communicate with any node,which greatly expands the application scenarios.Ground unit has built-in wifi module and LED display for understanding the working condition of the device in real time.

Features

Multi-function

Dual SBUS ports

3 serial ports, TTL&RS232&RS485

Multiple HD video,HDMI/AV/SDI

WiFi wireless transmision

3 serial ports

3 independent serial ports,support working simultaneously

level signal interfaces are TTL,RS232 and RS485

(support for TCP,UDP,Httpd Client,TCP Auto,WEB to serial working mode,etc.)

Built-inbattery

Built-in battery capacity of 6800mAh

Endurance:10h

LED display

Visually read the working state of the device

Built-in WIFI module

Hundreds of meters transmission range,the latency of video relay transmission＜40ms

Supporting data rate at 300Mbps Max

Able to wirelessly connect any interface of the airborne unit

Support video input by HDMI and LAN at the same time

Support double SBUS

Able to control drones and payload simulytaneously

Support dual LAN port

Support 2 LAN ports can work simultaneously

Parameters

Overall

Frequency:

800MHz: 806-826MHz

1.4GHz: 1427.9-1447.9MHz

2.4GHz: 2401.5-2481.5MHz)

Transmission range: 10km grade

Bandwidth: 3M/5M/10M/20M(adjustable)

Video latency : <=300ms

Airborne unit

RF power: 300mW-2W

Power supply port: XT30

Power supply voltage: 12-24v

Operation current: 470mA@12V power supply

Operation temperature: -35℃~+60℃

Antenna: 2-4dB rod antenna

SBUS port : 2*S-BUS port

Serial port: TTL*1 & RS232*1 & RS485*1

Video input: LAN*1, HDMI*1, CVBS*1

Dimension: 117mm(L)*70mm(W)*30mm(H)

Weight: 236g(exclude antennas)

Ground unit

RF power: 300mW-2W(adjustable)

Power supply interface: XT30 12V

Charging port: DC12.6V(Aviation plug/GH1.25)

Built-in battery Capacity: 6800mAh

Endurance: 10h with full capacity

WIFI data rate: 144Mbps-300Mbps

Antenna: 2-4dB rod antenna&8-9dB fiberglass antenna

SBUS port : 2*S-BUS port INTPUT

Serial port: TTL*1 & RS232*1 & RS485*1

Video output: LAN*2

Dimension: 139mm(L)*139mm(W)*48mm(H)

Weight: 1045g(exclude antennas)

Chinowing has a label as the leading developer of the portable and handheld ground control system in China. Yes, indeed! We love this label.

In an earlier time, the Chinowing team was in the development of UAVs. Each time, the team went out for the flight test and demo, a bulky ground control station was needed to carry, or a 3rd party video&data link with all kinds of wires, remote controller and the computer. Long deployment time, easy failure. If there is a portable all-in-one system that can do command&control, check the real-time video and be free of all kinds of connection wire, that would be too fine.

At that time, there was rarely any handheld GCS used, not any developers in our market. Chinowing CTO, Mr Hu Yanbin, with over 8 years experience in control system development and 5 years experience in the unmanned domain, began the adventure in 2015 to develop handheld GCS, all-in-one video&data&RC link with the brand Chinowing and have realized the high integration. Since the foundation, we have set out to develop high-performance products which are easy to use and integrate, with high criteria to meet the professional standards.

Until now, the Chinowing team has developed eight generations of portable GCS to cater to different application scenarios. The domestic origination dual SBUS output with each channel programmable enables remote control of the drone and the payload together, the user can self-define each channel. With the feature of being user-friendly, our devices have been widely used as remote control devices for UAV, UGV, robots, etc in defence, industrial applications.

Being a customer-obsessed business, we will and continue to invest heavily in R&D and be preoccupied with the wants and needs of customers.