Smart Flexible Pressure Sensors Piezoresistive Electronic Pen Micro Pressure Sensors
Brand Name:WG Sensor™
Certification:CE RoHS
Model Number:SI4-G thin film pressure sensors
Minimum Order Quantity:49pcs
Delivery Time:5-10 work days
Payment Terms:T/T, L/C, Western Union, MoneyGram
Contact Now
Add to Cart
Site Member
Location:
Zhengzhou Henan China
Address:
No.169 Xuesong Road National High-tech District Zhengzhou Henan province
Supplier`s last login times:
within 3 hours
Product Details
Company Profile
Product Details
Smart Flexible thin film pressure sensor piezoresistive electronic pen micro sensitive extreme response
Description
SI4-G flexible thin film pressure sensor is a new type of sensor with independent intellectual property
rights of flexible pressure sensor technology. It is printed on
flexible thin material with strong adhesion, bending resistance and
high sensitivity of flexible Nano functional materials, so as to
achieve high sensitivity of pressure detection.
The flexible film pressure sensor is a resistive sensor. The output
resistance decreases as the pressure applied to the surface of the
sensor increases. The pressure can be measured through a specific
pressure-resistance relationship.
SI4-G flexible film pressure sensor is mainly used in the pressure
triggering and detection of electronic pens. It is installed at the
back of the pen core. When the user writes with the electronic pen,
it can detect the change of writing pressure. After algorithm
processing, handwriting recognition can be realized. , Posture
correction and other functions, the signal can be collected through
a simple circuit.
Features
Ø Ultra-thin,thickness less than 0.25mm
Ø bending resistance
Ø Quick response
Ø Long life,passed the pressing test of more than 1 million times
Ø The output signal is easy to detect
Ø Customizable product length, size, pin package, etc.
Ø Customizable sensor range parameters
Performance Index
| Model | SI4-G |
| Range | 0~500g |
| Thickness | ≤0.25mm |
| Dimension | See specification and size description |
| Response point | ≤30g |
| Repeatability | ±10%(50%loaded) |
| Consistency | ±20%(Batch of the same model) |
| Hysteresis | +10% (RF+ - RF-)/RF+ |
| Durability | ＞One million times |
| Initial Resistance | ＞10MΩ(Non-Loaded) |
| Response Time | ＜1ms |
| Resume Time | ＜15ms |
| Test Voltage | Typical Value DC 3.3V |
| Operating Temperature | -20℃ ～ 60℃ |
| EMI | No produce |
| ESD | Insensitivity |
Data reference sheet
| Model | pressure/g | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 |
| SIG-4 | resistance/KΩ | 5.26 | 3.24 | 2.47 | 2.10 | 1.85 | 1.66 | 1.55 | 1.45 | 1.38 | 1.33 |
Reference Circuit
Instructions
- SI4-Glexible thin film pressure sensor is a non-polar component, there is no directionality in the circuit;
- When using, please place the pressure sensitive zone of the sensor on a firm, flat surface. Using the sensor on a curved or irregular surface will make the sensor initially conductive, that is, in a "response" state when there is no pressure; in this state, the sensor output resistance can still respond to pressure changes, and the corresponding relationship is no longer applicable to the reference data sheet;
- If the supporting surface and the force applying surface are both rigid and hard surfaces, and the contact surface is larger than the sensitive area of the sensor, due to the sensor's own structure, the pressure response may be small and unstable. A round soft rubber pad needs to be affixed to the center of the sensitive area, the diameter is slightly smaller than the sensitive area, and the area should be greater than 60% of the area of the sensitive area;
- You can use double-sided tape to fix the sensor on the supporting surface. Pay attention that the supporting surface is tidy and clean before pasting. It is recommended to use 3M brand double-sided tape; provide customized services;
After the sensor is stressed and maintains the pressure, the output
resistance value will drift slightly over time, usually within 5%.
This error can be reduced by the method of timing calibration. In
the calibration operation, the waiting time after applying pressure
is consistent with the waiting time in actual applications. Since
the force state of the sensor is different in different application
scenarios, it is recommended that the user arrange the sensor
according to the actual application scenario and test the drift
parameters by themselves.
Announcements
- When using the sensor, try to make the load received evenly and avoid direct contact with the sensor by sharp objects;
- Over-range use will reduce the performance of the sensor or even destroy the sensor;
- The sensor terminal is made of copper and tin-plated material, and the lead can be welded according to the needs. It should be noted that the soldering temperature should not be too high, it is recommended that it should not exceed 300°C, and the contact time should not exceed 1 second, so as to prevent the high temperature from melting and deforming the film substrate.
Details
About us
Smart Flexible Pressure Sensors Piezoresistive Electronic Pen Micro Pressure Sensors
Inquiry Cart
0