

Add to Cart
Procalcitonin (PCT) Test Cassette, With CE,Convenient To Use The
Fast and Reliable PCT, Fluorescence Immunoassay Test
Principle: | Fluorescence Immunoassay |
Specimen: | WB/S/P |
Reading Time: | 15 Minutes |
Storage Temperature: | 4-30℃ |
Cut-Off: | 0.5 Ng/mL |
Format: | Cassette |
Certificate: | CE |
Pack: | 10T/25T |
Shelf Life: | 2 Years |
Product Name: | Procalcitonin (PCT) Test Cassette, With CE,Convenient To Use The Fast And Reliable PCT, Fluorescence Immunoassay Test |
Applications:
The PCT Rapid Test Cassette (Whole Blood/Serum/Plasma) is a rapid
chromatographic immunoassay for the qualitative detection of
Procalcitonin in serum or plasma.
Description:
Procalcitonin(PCT) is a small protein that comprises 116 amino acid
residues with a molecular weight of approximately 13 kDa which was
first described by Moullec et al. in 1984.PCT is produced normally
in Ccells of the thyroid glands. In 1993, the elevated level of PCT
in patients with a system infection of bacterial origin was
reported and PCT is now considered to be the main marker of
disorders accompanied by systemic inflammation and sepsis. The
diagnostic value of PCT is important due to the close correlation
between PCTconcentration and the severity of inflammation. It was
shown that “inflammatory” PCT is not produced in Ccells. Cells of
neuroendocrine origin are presumably the source of PCT during
inflammation.
How to use?
Allow test cassette, specimen, buffer and/or controls to
equilibrate to room temperature (15-30℃) prior to testing.
1. Remove the Test Cassette from the foil pouch and use it as soon
as possible. Best results will be obtained if the assay is
performed within one hour.
2. Place the Test Cassette on a clean and level surface.
For Serum or Plasma specimens:
Hold the dropper vertically and transfer 1 drop of serum or plasma (approximately 25 μL) to the specimen well (S) of the Test
Cassette, and add 1 drop of buffer (approximately 40 μL), then start the timer. See illustration
below.
For Venipuncture Whole Blood specimens:
Hold the dropper vertically and transfer 2 drops of whole blood (approximately 50 μL) to the specimen well (S) of the Test
Cassette, and add 1 drop of buffer (approximately 40 μL), then start the timer. See illustration
below.
For Fingerstick Whole Blood specimens:
To use a capillary tube: Fill the capillary tube and transfer
approximately 50 μL of fingerstick whole blood specimen to the
specimen well (S) of the Test Cassette, then add 1 drop of buffer (approximately 40 μL) and start the timer. See illustration below.
3. Wait for the colored line is appeared. The result should be read
at 15minutes. Do not interpret the result after 20 minutes.
INTERPRETATION OF RESULTS
(Please refer to the illustration above)
POSITIVE:* Two distinct colored lines appear. One colored line should be in the control region (C) and another
colored line should be in the test region (T).
*NOTE: The intensity of the color in the test line region (T) will vary
depending on the concentration of PCT antigen present in the
specimen. Therefore, any shade of color in the test region (T)
should be considered positive.
NEGATIVE: One colored line appears in the control region (C). No apparent colored line appears in the test region (T).
INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques
are the most likely reasons for control line failure. Review the
procedure and repeat the test with a new test cassette. If the
problem persists, discontinue using the test kit immediately and
contact your local distributor.
Cat. No. | Product Description | Specimen | Format | Kit Size | Cut-Off | Status |
FI-PCT-402 | Procalcitonin(PCT) Rapid Test Cassette | S / P | Cassette | 10 T | 1 ng/mL | CE |