Home Smart Digital Thermostat Temperature Adjustment RS485 Type

Home Smart Digital Thermostat Temperature Adjustment RS485 Type

Specifications

Product Features

1. Full metal panel : Aluminum or Stainless steel;

2. Standard 86 wall box installation, multiple panels can connect seamlessly;

3.The back box is fireproof and good insulation

4. The material is not easy to generate heat, but has high conductivity.

Description

The network intelligent panel reads and modifies the internal registers through 485 communication to achieve remote monitoring and output control. The communication protocol adopts the standard MODBUS RTU communication protocol. Serial port settings: baud rate "9600", parity bit "none", data bit "8", stop bit "1". The two commands are separated by 100ms. If the instruction is not read within 2 seconds, it will be cleared, and if it is read, it will be cleared immediately. Reading time interval: greater than 20ms.

Functions

Basic Function

1. Thermostat on and off control;
2. Indoor temperature setting/indoor temperature measurement;
3. The fan speed can be selected as one of "high/medium/low/auto";
4. Air conditioning (refrigeration, heating, ventilation), floor heating, fresh air three modes can be switched;
5. With the function of manual temperature correction, manually restore the factory default values of the thermostat parameters, and manually set the thermostat communication address.

Display Function

1. Power on/off status display: the entire screen is not displayed when it is turned off, and the switch button indicator light is always on;
2. Temperature display: indoor temperature, temperature setting value;
3. Mode display: only one of air conditioning, floor heating, and fresh air will be displayed;
4. Wind speed display: high, medium, low, automatic sub-level display;
5. In the shutdown state, enter the temperature correction value display through the key combination, restore the factory default value setting display and address setting of the thermostat parameter.