CE SVC/FVC 3 Phase VFD Closed Loop Control 5hp/4kw 3 Phase Inverter
Brand Name:CHIFON
Certification:CE,ISO,SGS,EAC
Model Number:FPR500A-4.0G/5.5P-T4
Minimum Order Quantity:1pcs
Delivery Time:sample order 2 working days, bulk order 7-10 working days
Payment Terms:L/C, T/T, Paypal
Contact Now
Add to Cart
Active Member
Location:
Hangzhou Zhejiang China
Address:
No. 25 Xianxing Rd, Xianlin Industrial Park, Hangzhou, Zhejiang, China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
CHIFON Brand V/F Control CE Certificated 4kw/5HP 3 Phase VFD
Frequency Inverter
Product introduction
FPR500 series relies on TI company's DSP dual-core professional
control motor chip, which supplies the international leading vector
control algorithm to realize the real high-precision flux vector
torque control. It has built-in pg vector control (VC), pg-free
vector control (SVC), and V/F control modes, which are widely applied to high-speed control accuracy, rapid torque
response, and high performance at low frequency. The integration of torque control, speed control, and position
control can meet the high-performance requirements of customer
applications. And, FPR 500 has the ability to exceed the anti-trip performance of
similar products and adapt to the severe power grid, ambient
temperature, humidity, and dust, greatly improving the reliability of products.
Technical characteristics
Drive motor type:Ac asynchronous motor, Ac permanent magnet synchronous motor
Four control modes:PG vector control(FVC), PG-free vector control(SVC),
V / F control, Torque control
Speed control range:PG vector control(FVC)1:1000
PG- free vector control(SVC)1:200
V / F control 1:50
Speed control accuracy:PG vector control (FVC)±0.2%
PG- free vector control (SVC)±0.5%
Starting torque:PG vector control(FVC):180 % rated torque/0.01Hz
PG- free vector control (SVC)150% rated torque/0.25Hz
Torque control accuracy:PG vector control (FVC)±5%
PG- free vector control (SVC)±8%
Multi-motor switching: Two groups of motor parameters can realize the switching control of
the two motors.
Motor overheating protection:Optional IO expansion card, analog A / 3 can accept input from the
motor temperature sensor
Supports multiple encoders:Supports differential, open collector, uvw, rotary transformer,
sine and cosine encoder
Torque limitation and control: the "excavator" feature, automatically limits the torque during
operation to prevent frequent overcurrent trips. Closed-loop mode
can realize torque control.
Products Specifications:
| Basic Function | Specification | |
| Maximum output frequency | 0~500Hz | |
| Carrier frequency | 0.5kHz~16.0kHz;According to the load characteristics, carrier frequency can be adjusted automatically | |
| Input frequency | Range :47~63Hz | |
| Control mode | V/F Open/closed loop vector control(SVC/FVC) | |
| Speed range | 1:50(Vector mode 0 ) 1Hz/150% rated torque | |
| Overload capability | G type:150% rated current for 60s; 180% rated current for 3s 150% rated current for 3s | |
| Torque boost | Auto Torque boost Manual Torque boost; 0.1%~30.0%. | |
| V/F curve V/F | Four modes : Line , Multi-point , Square V/F curve, V/F separation | |
| Jog control | Jog frequency range:0.00Hz to F0-10(Max frequency) | |
| Accelerate/Decelerate curve | Line or S-curve Acc/Dec mode, four kinds of Acc/Dec time Range of Acc/Dec Time0.0~65000.00s. | |
| DC brake | DC brake frequency: 0.00Hz to Maximum frequency brake time: 0.0 to 36.0s brake current value: 0.0 to 100% | |
| Simple PLC, Multi-speed | 16-speed operating through built-in PLC or control terminal | |
| Built-in PID | Close loop control system can be formed easily by using PID | |
| Automatic voltage regulating (AVR) | Output voltage is regulated when voltage of the power network changes | |
| Overvoltage and over current stall control | During operation automatically limits the inverter output current and bus voltage, to prevent fan over current and overvoltage trip. | |
| Rapid current limiting function | Minimizing flow failures, protect the normal operation of the inverter | |
| Instantaneous stop non-stop | Load feedback energy compensation voltage is reduced and continues to maintain a short time when change is momentarily interrupted. | |
| Speed tracking start | For high-speed rotation of the motor speed identification, impact- free smooth start | |
| Rapid current limit | Rapid software and hardware limiting technology to avoid frequent converter over current fault. | |
| Virtual IO | Five sets of virtual DO, five sets of virtual DI, enables easy logic control. | |
| Timing Control | Timing control: set the time range 0.0Min~6500.0Hour | |
| Multi-motor switch | Two independent motor parameters, enabling two motors switching control | |
| Bus Support | Two independent Modbus communication, CAN-Link | |
| Command source | Given the control panel, control terminal, serial communication
port given. It can be switched by a variety of ways. | |
| Torque boost | Auto Torque boost Manual Torque boost ; 0.1%~30.0%. | |
| Frequency source | Nine kinds of frequency sources: digital setting, analog voltage setting, analog current setting, pulse setting, or serial port and so on. It can be switched by a variety of ways. | |
| Auxiliary frequency source | Nine kinds of auxiliary frequency source. Flexible implementation
of auxiliary frequency tuning, frequency synthesis. | |
| Input terminal | Six digital input terminals, one only supports 50khz high pulse
input Two analog input terminals, one support 0V~10V voltage input One support 0 ~ 10V voltage input or 0 ~ 20mA current input | |
| Output terminal | One high-speed pulse output terminal (optional open collector
type), support of square wave 0 ~ 50kHz signal output One digital output terminal One relay output terminals Two analog output terminals, support 0 ~ 20mA current output or 0 ~ 10V voltage output | |
| Display and operation | ||
| LED display | Display parameters and status information | |
The key lock and function selection | Achieve some or all of the keys locked, scope definition section
keys to prevent misuse. | |
| Protection function | Input/output phase failure protection ,Overcurrent protection ;Over voltage protection; Undervoltage protection; Overheat protection ; Overload protection | |
| Options | Brake assembly, PG card | |
| Environment | ||
| Application environment | In-door, free from direct sunlight, dust , corrosive gas, combustible gas, oil mist , steam , water drop and salt . | |
| Altitude | Lower than 1000m | |
| Vibration | Less than 5.9m/s(0.6g) | |
Product Installation :
FPR500 series VFD need to remove the cover plate to connect the main circuit and the control circuit.The cover plate of the plastic shell can be forcibly pushed out from the hook of the lower cover plate to the inside with a tool.
Frequency converter is usually installed vertically to facilitate air circulation and heat dissipation.Sufficient installation clearance distance shall be set aside around the frequency converter as shown in figure 3 - 1
When multiple frequency converters work, they are usually installed side by side.Where the installation of the upper and lower row is required, the heat of the lower row frequency converter will cause the temperature of the upper row equipment to rise and cause trouble, and measures such as installing heat insulation baffles should be taken.
CE SVC/FVC 3 Phase VFD Closed Loop Control 5hp/4kw 3 Phase Inverter
Inquiry Cart
0