Zero Load Lead Equivalent 1pb Radiology Lead Gowns Mobile Lead X Ray Protection Shield

Radiation Protection X Ray Protection Products Apron Lead Protective Collar

1.Description
The X-ray protective chamber is composed of a special material and a certain structural relationship to form a human exoskeleton support body. The lead cap, lead mask, lead garment and lead skirt and other protective equipment are installed on the exoskeleton support body, and all its weight is borne by the support body.Inside the exoskeleton, an X-ray shield is formed.
The operator will open the rear door, insert his hands forward into the sleeves, push the door back with his left hand, the door will automatically close, adjust the height suitable for his own height.
It can follow the operator to walk, all kinds of actions are not affected, because of the superior conditions of the support body, the operator does not need to bear the weight, the lead cap, lead clothing, lead skirt thickness thickened to improve the weight of lead, to ensure the safety protection of zero bearing.

2. Specification

1) Lead equivalent : 1mmpb

2)Structure

3.How to take on and off

A :Step of Taking on

l 1 Lift the mask

l 2 Untie the front of the lead coat and skirt

l 3 Put on the protective clothing sideways with one arm in the sleeve at the same time

l 4 Straighten the body up with the other arm in the sleeve

l 5 Hold the handles with each hand and press the height adjustment handle with the right hand.

l 6 Adjust the right height to make the shoulders touch the support frame. And lock the appropriate height with loosening the right handle.

l 7 Button the front of the lead coat and skirt

l 8 Pull the mask down (It’s allowable to lift and pull the mask at any time if not used.)

B :Step of Taking off

l 1 Lift the mask

l 2 Untie the front of the lead coat and skirt

l 3 Take off the protective clothing sideways

l 4 Close the front of the lead coat and skirt

l 5 Place the walk-supporting device in the designated area

4.How to Install

l 1. The installation of Walk-Supporting X-ray Protective Clothing is very convenient. Unwarp the packing box, take out of the upper supporting body and the lower one, insert the two vertical rods on the upper support body into the two straight pipes on the pitching loop, tighten the screws and hang the damped wire on the pitching loop.

l 2. Put the coat on the upper supporting body. (Pay attention to align the shoulder seam line with the protective cap vertical line.)

Beijing Hengtai Tech Co., Ltd was established in 2010. The company adheres to the development concept of "integrity all over the world and conducts all continents", adheres to the business policy of "strive to create greater value for customers", and is committed to providing MR shielding and CT protection. Systematic solutions, through technological innovation and professional services, create safe and reliable shielding rooms for the medical imaging field to protect the health and safety of medical staff and patients.
By 2023, the shielding accessories for MRI/CT/X-ray rooms manufactured and exported by Jovi have been used in 85 countries and regions around the world, and established long-term and stable cooperative relationships with customers. The one-stop technical guidance and installation services provided by the Jovi team have always been widely praised in overseas projects.
In the future, we will actively participate in innovation and change in the industry, work with partners to promote the development of the field of medical shielding and protection, continuously improve and improve our service system, and continue to contribute to the medical imaging diagnosis cause of all mankind.