

Add to Cart
Liner Excavator Loader Machinery Engine Parts Engine Cylinder
1260739 8N5676 D343 D348 D349 D342 D364 D386
Specification
ENGINE | LINER NO. | OME NO. | SIZE |
3116 | 7C6208 | OD A(mm): I D B(mm): 104 LD C(mm): L (mm): 196.85 TYPE : DRY | ||
3126 | 1077604 | |||
3208/3160 | 9N6275 | OD A(mm): 119.14 ID B(mm): 114.3 LD C(mm): 119.14 L (mm): 288.4 TYPE : DRY | ||
3306 | 2P8889 | OD A(mm): ID B(mm): 120.65 LD C(mm): L (mm): 254.9 TYPE: WET | ||
3406 | 2W6000 | OD A(mm): ID B(mm): 137.185 LD C(mm): L (mm): 274.33 TYPE: WET | ||
D342C/D339 | 8N5676 | OD A(mm): 168.07 ID B(mm): 146.05 LD C(mm): 177.4 L (mm): 382.5 TYPE: WET | ||
D343/768/769 | 1260739 | OD A(mm): 156.08 ID B(mm): 137.16 LD C(mm): 165.15 L (mm): 304 TYPE: WET | ||
S6KT | 5L7523 | OD A(mm): ID B(mm): 101 LD C(mm): L (mm): 195.5 TYPE: DRY |
Description
1260739 | Cylinder Liner, New
HHP HIGHWAY & HEAVY PARTS HHP provides parts equal or better in
quality compared to the OE at a fraction of the cost. || Products
are crafted with hard-wearing materials for long-lasting strength
and durability. || Parts meet or exceed OEM specifications to
ensure proper fit and function. || Image(s) is for illustration
purposes only and may not represent the actual part. || Products
are only sourced from quality certified manufacturing facilities.
Use this procedure in order to troubleshoot a high differential
pressure for the air inlet system. Use this procedure if one of the
following event codes are active. Refer to Troubleshooting, "Event
Codes" for information about event codes. Access the engine
monitoring system on the electronic service tool in order to view
the current trip points for these codes. For information on the
engine monitoring system, refer to Troubleshooting, "Engine
Monitoring System".
Table 1
Diagnostic Trouble Codes for Inlet Air Is Restricted
J1939 Code CDL Code Code Description
(Code descriptions may vary) Comments
107-15 E583(1) Engine Air Filter 1 Differential Pressure : High -
least severe (1) The air filter differential pressure is above the
trip point pressure for the delay time.
The code is logged.
107-16 E583(2) Engine Air Filter 1 Differential Pressure : High -
moderate severity (2) The air filter differential pressure is above
the trip point pressure for the delay time.
The code is logged.
The engine power is derated. Complete the procedure in the order in
which the steps are listed.
Table 2
Troubleshooting Test Steps Values Results
1. Check the Air Filter Element
A. Check the air intake system for plugged air filters or for
damaged air filters. If the engine is equipped with an air intake
precleaner, verify the proper operation of the air intake
precleaner.
Plugged air filter
Result: The air filter is clogged.
Repair: Clean or replace the air filter. Verify that the problem is
resolved.
Result: The air filter is not clogged.
Proceed to Test Step 2.
2. Check the Air Inlet Piping
A. Check the air inlet piping for damage or restrictions.
Damaged air inlet piping
Result: The air inlet piping is damaged or has restrictions.
Repair: Repair the piping or replace the piping. Verify that the
problem is resolved.
Result: The air inlet piping does not have damage or restrictions.
Proceed to Test Step 3.
3. Check the Enclosure Ventilation
A. Check that the engine has been installed in an enclosure that is
sufficiently ventilated.
Enclosure ventilation
Result: The engine does not have sufficient ventilation.
Repair: Repair the ventilation for the enclosure. Verify that the
fault is resolved.
Result: The engine has sufficient ventilation.
Contact the Dealer Solutions Network (DSN).
Other OE No.
Car Model | OE No. |
#174 | 126-0739 |
#174 | 6N8700 |
#174 | 5S3772 |
#174 | 2S0920 |
#174 | 6N8700H |
#174 | 1M7067 |