LC 24 Fiber Optic Adapter Panel 6 Channels With Four Channel Multi Mode Adapter

Q: What is the diameter of the holes used to install the fixed panel at both ends of the panel?
A: Hello, the diameter of the fixing holes at both ends of the panel is about 6.4mm. There are tacks on the holes, which can be installed without tools.
Q: Can I order packaging and labels without any factory information?
A: Yes! If there is a customized requirement
Q: What is the material of this panel?
A: The main body of the panel is made of cold-rolled steel, and the casing material is zirconia ceramic.
Q: Except for color, is there any difference in application between single-mode and multi-mode fiber adapter panels?
A: Hello, there is no difference in application between single-mode and multi-mode optical fiber distribution frames. The color is designed to match the color of the optical fiber jumper, which provides convenience for distinguishing the corresponding cables when wiring.

Our black Fiber Adapter Plates can be ordered individually or preinstalled into select RLH fiber optic patch panels.

RLH black Adapter plates utilize a common installation mounting format, typically referred to as a LGX foot print, so they may be mixed and matched as needed in compatible wall or rack mount patch panels. This provides maximum flexibility when populating a patch panel with fiber adapters.

Our black Fiber adapter plates are compatible with all RLH fiber patch panels (see note below) except for the Optimum Series. Since our adapter plates utilize a common format we are also compatible with many other vendor patch panels who support the common LGX Foot print type adapter plates.

*RLH patch panels will take either our black series or grey series Fiber Adapter Plates. Please check the individual product page to verify which series of plates is compatible.

*Not compatible with our RLH Optimum Series patch panels.

(1) Blank adapter board, black
(2) ST 6 fiber 6 position, with single mode adapter (yellow cover)
(3) ST 12 optical fiber 12 position, with single mode adapter (yellow cap)
(4) ST 6 fiber 6 position, with simplex multimode adapter (black cover)
(5) ST 12 fiber 12 position, with simplex multimode adapter (black cover)
(6) SC 6 fiber 6 position, with single mode adapter (blue)
(7) SC 12 fiber 6 position, with duplex single-mode adapter (blue)
(8) SC6 fiber 6 position, install and cut simplex multi-mode adapter (beige)
(9) SC 12 optical fiber 6 position loaded duplex multi-mode adapter (beige)
(10) SC 6 fiber 6 position, with simplex single mode adapter (green)
(11) SC 12 fiber 6 position, with duplex single-mode adapter (green)
(12) SC6 fiber 6 position, with simplex multimode adapter (water green)
(13) SC 12 light 6 position, with duplex multi-mode adapter (water green)
(14) LC 6 fiber 3 position, with duplex single-mode adapter (blue)
(15) LC 12 fiber 6 position, with duplex mode adapter (blue)
(16) LC 24 fiber 6 channels, with four channels, single mode adapter (blue)
(17) LC 6 fiber 3 position, with duplex multimode adapter (beige)
(18) LC 12 6 position, with duplex multi-mode adapter (beige)
(19) LC 24 fiber 6 channels, with four channels multimode adapter (beige)
(20) LC6 fiber 3 position, with duplex single-mode adapter (green)
(21) LC 12 fiber 6 position, with duplex single-mode adapter (green)
(22) LC 24 fiber 6 channels, with four-channel single-mode adapter (green)
(23) LC 6 fiber 3 position, with duplex multimode adapter (water green)
(24) LC 12 fiber 6 position, with duplex multimode adapter (water green)
(25) LC 24 fiber 6 channels, with four-channel multi-mode adapter (Aqua)

(26) FC 6 fiber 6 position, with single mode adapter (yellow cap)
(27) FC 6 fiber 6 position, with simplex multimode adapter (black cover)
(28) FC 6 fiber 6 position, with single mode adapter (green cap)
(29) RU-45 4-position adapter board with CAT6 coupler trapezoid
(30) RJ-45 4-position adapter board, equipped with CAT6) punched trapezoid

Shenzhen Jiangfan Communication Equipment Co., Ltd. is a comprehensive enterprise integrating R&D, production, sales and service.
The company promotes production efficiency and reduces product costs through continuous technological innovation and new process applications.
The company's high-quality products, reasonable prices, and accurate delivery date to cooperate with customers.

Shenzhen Jiangfan Communication Equipment Co., Ltd. is a comprehensive enterprise specializing in design, development, production and processing:
The company has processing equipment: plastic injection molding machine, CNC machining center, CNC lathe, sheet metal bending, laser, riveting, polishing machine, ultrasonic, milling machine, wire cutting, punching machine, surface grinder, quality control equipment, projector, micrometer, ring gauge Product control degree, etc. We have rich experience in supporting production, high quality control, high efficiency, and high-quality after-sales service. The company has an enterprise team with professional skills and dedication and 8 years of manufacturing experience. The company has established long-term and stable cooperative relations with many scientific research units, research universities, and manufacturers in various fields.