High Performance 128 Channel Fiber Optic Switch 1xN Passive 1310 / 1550nm
Brand Name:GAPHO
Model Number:1xN Fiber optic switch
Minimum Order Quantity:50
Delivery Time:7-10 day
Payment Terms:T/T, T/T, D/P, D/A, L/C, MoneyGram
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
Floor 3, Building B, No. 24, Third Industrial Zone, Langxiii, Songgang Town, Baoan District, Shenzhen, Guangdong, China
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
◇ features
- More Than 128 Channels
- ·Low Loss and High Reliability
- ·Parallel Interface (TTL)
- ·Modularized Design
- ·Epoxy-free on Optical Path
◇ Application:
- ·Ring Network
- ·Remote Monitoring in Optical Network
- ·Testing of Fiber, Optical Component
description
1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
◇specification
| Parameters | Unit | GP-OSW1×N | |||
| Insertion Loss | dB | 1<N≤32 | 32 <N≤64 | 64 <N≤128 | |
| Type:0.8 Max:1.0 | Type:0.8Max:1.2 | Type:0.8Max:1.3 | |||
| Wavelength Range | nm | 850±40 /1300±40,1550MM | 1260~1650SM | ||
| Test Wavelength | nm | 850/ 1300,1550MM | 1310/1550SM | ||
| Return Loss | dB | MM≥30SM≥50 | |||
| Crosstalk | dB | ≥70 | |||
| PDL | dB | ≤0.05 | |||
| WDL | dB | ≤0.25 | |||
| TDL | dB | ≤0.25 | |||
| ER (PM swtich) | dB | ≥16 (PoIarization Maintaining switch) | |||
| Repeatability | dB | ≤±0.05 | |||
| Durability | Cycles | ≥10 Million | |||
| SwitchingTime | ms | ≤10(Sequence switch time of adjacent channel) | |||
| OpticalPower | mW | ≤500 | |||
| OperatingTemperature | ℃ | -5~+70 | |||
| Storage Temperature | ℃ | -40~+85 | |||
| Relative Humidity | % | 5 ~95 | |||
| Dimension | mm | 135×40×32(N≤12) | 135×60×32(N≤18) | 135×60×38(N≤32) | |
| 150×80×67(N≤64) | 165×100×100(N≤98) | 185×130×130(N≤128) | |||
◇DB-15 male connector (max.1×64)
(max.1×128)
| Pin No. | Signal Name | I / O | Description |
| 2 | D0 | Input | TTL, Channel selection bit 0 |
| 3 | D1 | Input | TTL, Channel selection bit 1 |
| 4 | D2 | Input | TTL, Channel selection bit 2 |
| 5 | D3 | Input | TTL, Channel selection bit 3 |
| 6 | D4 | Input | TTL, Channel selection bit 4 |
| 10 | D5 | Input | TTL, Channel selection bit 5 |
| 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) |
| 1, 9 | GND | Input | Ground |
| 15 | +5VDC | Input | 5.0±5% VDC Digitalpower supply(max 50mA) |
| 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply(max 800mA) |
| 14 | ISP | Input | TTL, Forinternal firmware upgrade of the module, in the normal mode, please suspended thepin; In the upgrade mode, please send the pin to ground. |
| 13 | NA |
| Pin No. | Signal Name | I / O | Description |
| 2 | D0 | Input | TTL, Channel selection bit 0 |
| 3 | D1 | Input | TTL, Channel selection bit 1 |
| 4 | D2 | Input | TTL, Channel selection bit 2 |
| 5 | D3 | Input | TTL, Channel selection bit 3 |
| 6 | D4 | Input | TTL, Channel selection bit 4 |
| 10 | D5 | Input | TTL, Channel selection bit 5 |
| 13 | D6 | Input | TTL, Channel selection bit 6 |
| 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) |
| 1, 9 | GND | Input | Ground |
| 15 | +5VDC | Input | 5.0±5% VDC Digitalpower supply(max 50mA) |
| 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply(max 800mA) |
| 14 | ISP | Input | TTL, Forinternal firmware upgrade of the module, in the normal mode, please suspended thepin; In the upgrade mode, please send the pin to ground |
◇optical route
| Pin No. | Signal Name | I / O | Description |
| 2 | D0 | Input | TTL, Channel selection bit 0 |
| 3 | D1 | Input | TTL, Channel selection bit 1 |
| 4 | D2 | Input | TTL, Channel selection bit 2 |
| 5 | D3 | Input | TTL, Channel selection bit 3 |
| 6 | D4 | Input | TTL, Channel selection bit 4 |
| 10 | D5 | Input | TTL, Channel selection bit 5 |
| 13 | D6 | Input | TTL, Channel selection bit 6 |
| 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
| 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) |
| 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) |
| 1, 9 | GND | Input | Ground |
| 15 | +5VDC | Input | 5.0±5% VDC Digitalpower supply(max 50mA) |
| 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply(max 800mA) |
| 14 | ISP | Input | TTL, Forinternal firmware upgrade of the module, in the normal mode, please suspended thepin; In the upgrade mode, please send the pin to ground. |
company profile
We are specialized in providing solutions for optical cable,
packaging solutions for optical devices, and manufacturing of other
electronic equipment parts. Our products are widely used in optical
communication, electronics, medical care, oil pipeline, audio
industrial control, radio, instrumentation and other industries.We
have a good design and production team to provide customers with
high-quality, reliable and efficient products.
In the process of cooperation, our innovation and service awareness
are well received by our customers.
The company specializes in the production of optical communication
equipment, optical devices, optical jumpers, distribution boxes,
distribution frame.Our company
1.Machinery department: provide precision machinery processing,
sheet metal parts processing, plastic injection molding processing,
processing and manufacturing supporting various parts.
2. Optical communication department: provide customized processing
of optical devices such as optical jumper, optical module, optical
switch, wave divider, attenuator adapter, coupler, optical
splitter, circulator, isolator, collimator, optical amplifier, etc.
FAQ
Q:Can you design and customize production according to my
requirements
A:Yes, you can tell us your requirements and ideas, we can design
drawings, or provide samples, 2D floor plans or 3D drawings
(support proe, solidwork, core, Auto CAD, DXF, DWG, step file
formats).
Q: Are you trading company or manufacturer ?
A: We are factory.
Q:When our company be established?
A: We started from year 2013
Q: Can you provide samples for customers?
A: Yes, but the shipping will be charged on the customer's account.
Q:Do you offer OEM services?
A: We accept OEM, ODM. Cable sizes and materials can be customized.
High Performance 128 Channel Fiber Optic Switch 1xN Passive 1310 / 1550nm
Inquiry Cart
0