4 Wire Resistive Touch Screen , 19 Inch Touch Screen Panel For POS Monitor

Brand Name:CJTOUCH
Certification:CE \ FCC
Model Number:CJVTW4190A1
Minimum Order Quantity:1pcs
Delivery Time:3-5 work day
Payment Terms:T/T, Western Union
Contact Now

Add to Cart

Active Member
Location: Dongguan Guangdong China
Address: 2~5th Floors, Block 6/B Anjia Industrial Park, FengGang, DongGuan GuangDong523690 China
Supplier`s last login times: within 23 hours
Product Details Company Profile
Product Details

4 wire resistive touch screen 19inch lcd resistive touch screen for POS Monitor

How does a resistive touch screen work?
In simple terms, a Resistive Touch Screen is a touch-sensitive computer display that responds by applying pressure.When contact is made to the surface of the touchscreen, these two sheets are pressed together. Each sheet has horizontal and vertical lines that register the precise location of the touch.


The sensing process is as below.

The sensing process Voltage is imposed between the electrode X1 and X2 on the top sheet. Then, there will be formed on the top sheet an equipotential distribution that is parallel to the X1 and X2.

Assuming that the electrode X1 is 0V (Ground), then impose 5V to the electrode X2. If the central point between the right and left electrodes is touched, 2.5V would be measured by the bottom sheet. If a point 1/5 away from X1 (4/5 away from X2) is touched, 1V would be measured by the bottom sheet. The X coordinate point is detected in this way.

After detecting the coordinate point in X direction, Voltage is imposed between the electrode Y1 and Y2 on the bottom sheet. The point between Y1 and Y2 (Y coordinate) would be measured by the top sheet, just in the same manner as X coordinate in the step 1-2.

As the set of step 1, 3 is repeated, the X and Y coordinate points of touched locations keeps being detected.


Is there structural difference between 4-wire and 5-wire technologies?

Just same as analog 4-wire resistive technology, an analog 5-wire resistive sensor consists of top and bottom sheets which are facing each other with a gap in between. Unlike analog 4-wire resistive technology, electrodes are placed on four corners of the bottom sheet in analog 5-wire technology. The sensing process is as below


Main Feature

  • High accurate
  • Pressure sensitive
  • Can responds to any input device
  • Short response time
  • Compact size for easy integration
  • Customization available

Specification of Product

4 Wires Resistive Touch Panel Specification
General Size5.7 inch To 22 inch
Fit in withPanel display device
Mechanical
Input MethodFinger or gloved hand (rubber ,cloth or leather)
Active ForceStylus or Finger or Similar <45g~110g
Ball Impactø13.0. Steel Ball/9g, Height=30cm, 1 time, no damage [Impact at center area]
Durability>35 million touches
Positional Accuracy<1.5%
Optical
Light Transmission82%
Clear surface<3%
Anti-glare Surface<4%
Anti-Newton<10%
Gloss90±20 gloss units tested on a hard-coated front surface Accordance with ASTM D 2457
Electrical
Supply voltageDC5V
Circuit ResistanceX:20~25Ω0, Y:20~250Ω
LinearityX<1.5%, Y<1.5%
Response<15ms
Insulation>20MΩ/25V(DC)
EnduranceNo acting damage at DC50V/60sec.
ResolutionBased on controller resolution of 4096 x 4096
Environmental
Operation Temperature-10°C ~ +60°C
Operation Humidity20%RH ~ 85%RH, no condensing
Storage Temperature-40°C ~ +80°C
Storage Humidity10%RH ~ 90%RH, no condensing
WaterproofNot damaged by running water applied to the active area
Reliability
Heat Cycle70°C /240 hrs
Cold Cycle-40°C /240 hrs
Thermal Cycle-40°C ~7°0C [60 min./cycle] *10 cycles
Operationg System
Operation SystemLinux/ Dos / Windows ME/95/98 / NT4.0/XP/2000/ 7 /Mac OS
Warranty
Touch screen 1 years
Touch Controller 1 years

Picture of Product


Technical Drawing


China 4 Wire Resistive Touch Screen , 19 Inch Touch Screen Panel For POS Monitor supplier

4 Wire Resistive Touch Screen , 19 Inch Touch Screen Panel For POS Monitor

Inquiry Cart 0