380V Shot Blast Cleaning Equipment 220V High Pressure
Brand Name:yaoqiang
Model Number:HP1020
Minimum Order Quantity:1 set
Delivery Time:20 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Place of Origin:Jiangsu China
Contact Now
Add to Cart
Active Member
Location:
Wuxi China
Address:
716, Building 39, Liandong u Valley, No.100, Fengbin Road, Liangxi District, Wuxi City
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Automatic H Beam Steel Roller Conveyor Shot Blasting Cabinet Equipment Machine Wholsale
INTRODUCTION
Pass-through type shot blasting machine is used for cleaning of steel plate, steel structure and profile.
This kind of shot blasting machine not only remove the scale and
dust during welding, but also can enhance workpieces fatigue
resistance, reaching the purpose of improving the inner and surface
quality of steel plate.
| Model (can be customized) | HP1020 | HP1240 | HP1450 | |
| Workpiece dimention | section length*width (mm) | 1000*2000 | 1200*1400 | 1400*52000 |
| length (m) | 12 | 15 | 15 | |
| Quality standard | surface cleaness | A-BSa2-Sa2½ | A-BSa2-Sa2½ | A-BSa2-Sa2½ |
| shot-blaster | number (pc) | 8 | 8 | 8 |
| power (KW) | 8*11 | 8*11 | 8*15 | |
| inlit and outlet conveyor | loading capacity kg/m | 200 | 1000 | 1000 |
| convey speed (m/min) | 0.5-5 | 0.5-5 | 0.5-5 | |
| circulation quantity (T/h) | 120 | 120 | 120 | |
| Overall power (kw) | 125 | 140 | 175 | |
| pit depth (m) | 1.9 | 1.9 | 1.9 | |
| main frame length*width*heigh (mm) | 6770*2900*3150 | 7895*2985*3460 | 7895*3200*3760 | |
Conveyor system
It consists of loading and unloading rollers, chamber rollers,
connecting rollers.
Rollers in the blasting cabinet are protected by special alloy jacket with lifetime over 4,000 hours.
Conveyor system is driven by motors with inverter. Rollers can be controlled manually and automatically.
Step-less speed is available. Roller conveyor could move in step with the whole machine or move faster.
Blasting chamberScrew conveyorScrew conveyor consists of cycloid needle wheel decelerator, screw
axis, conveyor shell, bearing, etc. It is a standard conveying
device and an important part of abrasive circulating system. The
screw blade is made of 16 Mn.This unit is responsible for conveying
the abrasive to the elevator. Screw conveyor located at the bottom
of shot blasting chamber, the spiral blade welding in the drive
shaft. Conveyor motor drives screw conveyor to send abrasive to
discharge outlet, then the mixed abrasive will be conveyed to
elevator bottom. On both ends of the screw conveyor adopt triple
seal protection. the abrasive and dust will drop to
Rollers in the blasting cabinet are protected by special alloy jacket with lifetime over 4,000 hours.
Conveyor system is driven by motors with inverter. Rollers can be controlled manually and automatically.
Step-less speed is available. Roller conveyor could move in step with the whole machine or move faster.
Blasting chamber
In the blasting chamber, the wall is protected by SPMn13 material
liner and 65Mn protective liner, which has high wear resistant
performance. Chamber inside protection plate all adopt the high
strength nut fixed and pressure on the inner of blasting chamber,
easy tear open outfit replacement. Prolong service life, reduce the
cost and reduce maintenance frequency. The steel abrasive fall down
freely and collected by screw conveyor.
Screw conveyorScrew conveyor consists of cycloid needle wheel decelerator, screw
axis, conveyor shell, bearing, etc. It is a standard conveying
device and an important part of abrasive circulating system. The
screw blade is made of 16 Mn.This unit is responsible for conveying
the abrasive to the elevator. Screw conveyor located at the bottom
of shot blasting chamber, the spiral blade welding in the drive
shaft. Conveyor motor drives screw conveyor to send abrasive to
discharge outlet, then the mixed abrasive will be conveyed to
elevator bottom. On both ends of the screw conveyor adopt triple
seal protection. the abrasive and dust will drop to
the clearance between end plate and bearing once leak out, will not
enter the bearing. Screw conveyor shaft with sensors detecting unit
can detect the working state.
Main technical performance of HP1020 shot blasting macine
| Project | Work unit | Numerical | |||||
| Cleaned workpiece dimensions | Length | mm | ≤10000 | ||||
| Width | mm | ≤800 | |||||
| Du Gao | mm | ≤1600 | |||||
| Shot blasting machine through the door (width x height) | mm | 1000 ×2000 | |||||
| Transmission frequency range | m/min | 0.5 ∽3.0 | |||||
| After descaling the surface roughness | Sa2.5 | ||||||
| Motor, reducer | Domestic high quality reducer | ||||||
| Electrical components | Zhengtai electrical appliance and domestic quality instruments, meters, brand wire and cable | ||||||
| Pneumatic control system | Pneumatic components | Domestic quality components | |||||
| Host size | Length x width x height | mm | ≈5500*1200*2600 (Without filter) [Deep Foundation 1800](For reference only) | ||||
| Using environment | Factory voltage:320V±10% 50HZ±1HZ | ||||||
| Ambient temperature:-15~40ºC | |||||||
| Relative humidity:85% ≤ | |||||||
Blasting performance parameters
| Project | Work unit | Numerical | ||
| Shot blasting Chamber | Length x width x height | mm | 1500*1200*2600 | |
| Thickness of plate | mm | 8 | ||
| Wear-resistant trim material | High chromium cast iron mm | Thickness:12 | ||
| Qian attached to a sealed room | Length x width x height | mm | 2000*1200*2600 | |
| Thickness of plate | mm | 3.5 | ||
| Structure of wear-resistant curtains | Wear-resistant rubber sheet | |||
| Wear-resistant rubber sheet | mm | 10 | ||
| Shot blasting machine | Model | Q034 | ||
| Single shot blasting | kg/min | 220 | ||
| Single power | kw | 11 | ||
| The number of | Generic classifier | 8 | ||
| Blade life | Hour | 400-600 | ||
| Projectile | First mount | kg | 3000 | |
| Diameter | mm | φ1.5 | ||
| Hardness HRC | HRC | 40-45 | ||
| Sand loop System | Vertical screw conveyor | Lose pill weight | T/H | 110 |
| Screw diameter | mm | 320 | ||
| Power | kw | 5.5 | ||
| Horizontal spiral Conveyor | Lose pill weight | T/H | 110 | |
| Screw diameter | mm | 320 | ||
| Power | kw | 4 | ||
| Sand separator | Power | kw | 4 | |
| Type of separation | Full curtain flow-screen | |||
| Wind speed | m/s | 4-5 | ||
| Scoop type hoisting machine | Power | kw | 7.5 | |
| Lifting amount | T/H | 110 | ||
Transmission parameters
| Project | Work unit | Numerical | |
| Conveyor Length | From | mm | 950 |
| Load | T/m | 0.8 | |
| Transmission mode | Plate chain interconnect | ||
| Blast cabinets parts | Here metres | 5.5 | |
| Conveyor parts | Here metres | 10 | |
| Output section | Here metres | 10 | |
| Drive motor | Adjustable-speed motor | Kw | 3*2 |
Dust removal system
| Project | Work unit | Numerical | |
| Dust removal system | Composed of baghouse dust collection system | ||
| Bag dust catcher model | Fsc-48 | ||
| Bag material | Industrial felt | ||
| Bag number | Generic classifier | 96 | |
| Fan model | 4-72No5 | ||
| Fan power | kw | 7.5kw*2 | |
| Total pressure | Pa | ≈Max2056 | |
| Air volume | The total air volume | m3/H | ≈Max14000 |
| Dust removal efficiency | % | 99.9 | |
| Low noise | dB | ≤85 | |
| Dust concentration | mg/ m3 | ≤65 | |
380V Shot Blast Cleaning Equipment 220V High Pressure
Inquiry Cart
0