Optional accessories:four-connected charging (device charging), four-connected charging (battery charging), protective cover (back strap), waist bag,
large capacity Lithium polymer battery, protective film (composite)
Add to Cart
IDATA 50P Data Collector Handheld PDA Barcode Scanner Android Support Dual-Band Wi-Fi PDA IDATA 50P
System Configuration | ||
Processor | Octa-core 2.0 GHz | |
Operating system | Android 9.0 | |
Memory (ROM+RAM) | 16GB+2GB | |
SIM | Single SIM card | |
Expansion slot | Micro SD card, up to 256 GB | |
Display screen | 4.7-inch, resolution: 1280*720 pixel | |
Touch screen | Industrial capacitive screen, supporting two-point touch + gesture
operation | |
Camera | 8 MP autofocus camera in the back side (13 MP optional), LED flash | |
Flashlight | 800mA flashlight | |
Keyboard | 9 keys in total, front key*4, side scan*2, side custom key*2, side
power key*1 | |
Battery | Lithium battery 3.85V, 4000mAh, removable *Executive standard: GB31241-2014 | |
Audio | Built-in microphone | |
Charging | Type-C charging and pin port charging, 18W fast charging | |
Prompts | Vibration reminder/LED reminder/audio reminder | |
Vibrating motor | Built-in vibrating motor | |
Sensor | Gravity sensor (G-sensor) | |
Display | 4.7 inches | |
Camera | 800 pixels rear | |
Battery | 3.7V 3600mAh | |
Audio | Built-in microphone | |
Charging | Type-C charging and pin port charging, 18W fast charging | |
Prompts | Vibration reminder/LED reminder/audio reminder | |
Vibrating motor | Built-in vibrating motor | |
Sensor | Gravity sensor (G-sensor) | |
Intercom function (optional) | Supporting one-button PTT calls | |
Structure parameters | ||
Dimension (LxWxD) | 150mm*73.5mm*16mm | |
Weight | 230g(Within battery) | |
Communication transmission | ||
Wireless wide area network (Network frequency) | Asia & Europe: 2G:B2/B3/B5/B8 3G:WCDMA:B1/B2/B5/B8,CDMA BC0,TD-SCDMA:B34/B39 4G:FDD-LTE:B1/B3/B7/B8/B20,TDD-LTE:B34/B38/B39/B40/B41 America: 2G: B2/B3/B5 3G: B1/B2/B4/B5,CDMA BC0/BC1 (America) 4G: B1/B2/B3/B4/B5/B7/B12/B17/B28A/B28B/B41 | |
Wireless wide area network (Data service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO/WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE | |
WLAN | Wi-Fi 802.11a/b/g/n/ac/r/d/e/h/i/j/k/v(2.4G+5G dual-band Wi-Fi),
fast roaming ,Wi-Fi 5G PA | |
BT | BT 5.0 | |
GPS | GPS/AGPS/Beidou/Galileo/GLONASS | |
PSAM card | Supporting | |
Operating Environment | ||
Working temperature | -20℃~60℃ *For your safety, please do not charge in a low temperature environment | |
Storage temperature | -40℃~60℃(Without battery) | |
Humidity | 0%~95% (no condensation) | |
Drop specification | 1.5m marble floor dropped several times | |
Protection level | IP67 | |
Electrostatic protection | ±15KV (air discharge), ±8KV (contact discharge) | |
Scan engine | ||
Barcode | Support 1D/2D scanning engine | |
Scanning accuracy | ≥3.33mil | |
Scanning angle | Tilt ±60°, deflection ±60°, rotation 360° | |
Angular Field of View | Horizontal: 44.3°; Vertical: 28.4°; Diagonal: 51° | |
Motion tolerance | 8m/s | |
NFC (Optional) | ||
Frequency | 13.56MHz | |
Reading distance | Within 30mm | |
Communication protocol | ISO14443A/14443B/15693 | |
Input/output Interface | ||
USB interface | Type-C (with earphone function) *1 | |
OTG | Supporting | |
Development support | ||
Development language | Java | |
API | iScan API (Scan Development Kit), Device API (Device
Management/Configuration Development Kit), Android standard
interface | |
Development tool | Eclipse/Android Studio | |
Accessories | ||
Standard accessories | power adaptor*1, charging cable*1, lithium battery*1, hand strap*1,
protective film*1 | |
Optional accessories | single cradle,2-in-1 charging stand (host & battery),device
4-slot charging cradle,battery 4-slot charging cradle,protective case,waist bag | |
Note | ||
1 | As the product line is updating from time to time, the information
in this document is subject to change without notice. |