Industrial Serial RS232 RS485 RS422 SC Fiber Media Converter Modem Single Mode 20KM
Brand Name:E-link
Certification:ROHS,FCC,CE
Model Number:LNK-IRS93-SC20
Minimum Order Quantity:1 pcs
Delivery Time:5-12 working days
Payment Terms:T/T, Western Union, MoneyGram, Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Industrial Serial RS232 RS485 RS422 Fiber SC Media Converter Modem
Single Mode 20KM
Fiber Optical Modem Package Content
► LNK-IRS93 Series Fiber Optic Modem x 1
► Quick Start Guide x 1
► L-shaped wall mount bracket x 1
Industrial Media Converter Installation
SC/ST Fiber Optic Port Connection (SC default, ST optional)
The concept behind the SC/ST port and cable is straightforward.
Suppose you are connecting devices I and II. Contrary to electrical
signals, optical signals do not require a circuit in order to
transmit data. Consequently, one of the optical lines is used to
transmit data from device I to device II, and the other optical
line is used transmit data from device II to device I, for
full-duplex transmission.
All you need to remember is to connect the Tx (transmit) port of
device I to the Rx (receive) port of device II, and the Rx
(receive) port of device I to the Tx (transmit) port of device II.
If you make your own cables, we suggest labeling the two sides of
the same line with the same letter (A-to-A and B-to-B, as shown
below, or A1-to-A2 and B1-to-B2).
ATTENTION:
1.This is a Class 1 Laser/LED product. To avoid causing serious
damage to your eyes, do not stare directly into the laser beam.
2.The above text is for dual fiber port connection only; if for
single fiber port connection, just using 1 fiber cable for
connection, not need to tell Tx or Rx side.
RS232 RS422 RS485 Serial Media Converter Setup
a) Connect the RS232/422/485 port of the media converter to a
serial device with a serial cable.
b) Connect the fiber cable from the device (media converter) on the
other end to the SC/ST connector.
c) After the device is powered on, the PWR indicator will all be
on. If the indicators are not on, check the power supply
connection.
d) After all cables are correctly connected, the indicators will be
lit as per port status LEDs
RS485 Data to Fiber Optic Converter Ordering Information
Model | Description |
LNK-IRS93-SC20 | Industrial Serial RS232/RS485/RS422 , SC SM 1310nm, 20m |
Mounting Options | ► Default DIN-Rail Bracket installed, Wall Mount Bracket is included. |
Power Options | ► Power Supply is to be purchased separately |
Industrial Serial RS232 RS485 RS422 SC Fiber Media Converter Modem Single Mode 20KM
Inquiry Cart
0