380V / 220V Qichen Paper Cup Machine Double Wall Paper Cup Making Machine

water cup filling machine qichen paper cup machine coffee cup printing machine double wall paper cup making machine

Machine model: high-speed simple paper cup machine
Backside Soldering : Copper Heater Ultrasonic Heater

Raw material : single side PE coated paper (popular hot drink cup) single/double PE coated paper (popular hot drink cup and cold drink cup)
Total weight : Gw /NW:1750 kgs/1650 KgS.
Working air source (ultrasonic): Air pressure 0.4MPa a. machine.
Cup bottom heating: heater knurling (single-sided PE paper is heated and knurled; double-sided PE paper is knurled with cooling device circular water.)
Bottom knurling: heat knurling (if using single layer PE coated paper)

Electric System:

High-quality brand electrical systems, such as Delta, Schneider.
The PLC control system adopts the Delta brand, which is made in Taiwan and is reliable.
quality.

Servo Motor:

The bttom paper feeding is controlled by servo motor and stepping motor,which greatly improve paper feeding in high precision and
high efiency way.(more stable ,less troubles and save bottom paper)

Excerpted from the Internet, for reference only

The cup must be familiar to everyone. It is used for daily drinking. With the change of the times, the cup is also diversified with the times, regardless of its shape or material. The products are extremely rich. Today, let's learn what Amazon needs to do to put the cup on the shelf?
1, At present, the following three types are mainly used:
1) Plastics:
1. When polypropylene (PP) is tested by FDA, the adopted regulation is 21cfr177.1520, and the test items are n-hexane migration, xylene migration, melting point and density.
2. The regulations adopted for FDA testing of polyolefin copolymer (PO)/PP copolymer are 21cfr177.1520. The non-standard testing items are n-hexane migration, xylene migration and density.
3. The FDA test of polycarbonate (PC) adopts the 21cfr177.1580 regulation, and the test items are the extraction amount of ionic water, 50% ethanol and n-heptane.
2) Metals:
There are many items that need to be done for metal cups to do FDA, mainly including metal (general requirements) and total chromium (stainless steel materials), among which metal (general requirements) includes water extract, n-heptane extract and 8% ethanol extract, and the regulation is 21cfr175.300; The general recognized as safe is adopted for total chromium (stainless steel).
3) Glass:
Compared with the above two materials, glass is much simpler, and it needs to be tested for lead and cadmium dissolution. The regulations adopted are FDACPG7117.06 and 07.
4) FDA of the US Food and Drug Administration is responsible for supervising food contact materials. Such materials must be tested and certified to ensure that they meet the food contact safety standards. Chapter 21 of the US Federal Regulation CFR specifies such materials and regards them as "indirect food additives". The above products can only be sold on the market after being tested and certified as safe by FDA. FDA has the right to inspect the manufacturers and sue the violators.
15% trimethylsilane oxy silicate is added as the film forming agent to improve the waterproof, oil repellency and migration resistance of the product; The emulsifier adopts polyether modified silicone oil emulsifier, which is convenient and efficient;
2, FDA certification process:
1. Application
2. Quotation
3. Send samples
4. Payment
5. Test passed
6. Issuance of Certificates