...Features of Globe Bolted Bonnet: Outside Screw and Yoke: Rising stems: Metallic seating surfaces 3. Body and Bonnet Connection Bolted bonnet;...
Add to Cart
Api Class 150LB Cast Steel Wedge Gate Valve with Flanged / Bw Ends Z40H Typical Use Gate valves are used to permit or prevent the flow of liquids, and...
Add to Cart
API 600 Cast Steel Gate Valve Class150-1500 Rising Stem OS&Y Rising-stem cast steel gate valves are used when it is important to know by immediate ins...
Add to Cart
Full Bore API600 Cast Steel Gate Valve PN16 16 Inch Gate Valve Non Rising Stem flex wedge gate Valve DN400 PN25 WCB General Introduction VERVO Cast ga...
Add to Cart
...
Add to Cart
GATE VALVE FLANGETYPE Specifications: 1/2"~36" (DN15~DN900) W. P.: PN10/16/25/40 CLASS 150/300/600/900/1500 JIS 10K W. T.:-20℃ ~200℃ (-4℉~392℉) Invest...
Add to Cart
Valve Manufacturing standards: API, ANSI, BS, DIN, JIS Gate Valve Size range: from 1/2 inch to 36 inches (DN15mm - DN900mm) Pressure: from ANSI class ...
Add to Cart
~1500 OS&Y, Rising stem, Flexible Wedge Bolted Bonnet,Threaded or welded seat ring ASTM A216 WCB, A217 ......
Add to Cart
A216 WCB Class150 Cast Steel 3 inch OSY Flanged Stainless Steel Gate Valve Gate Valve Features Gate Valves of Rising Stem type, the stem will rise abo...
Add to Cart
GATE VALVE, CARBON STEEL, ASTM A216 GR WCB, GATE 12", WEDGE GATE 150 LBS (CLASS 150), RAISED FACE FLANGED, BOLTED BONNET CARBON STEEL VALVE: WEDGE GAT...
Add to Cart
.../ iron WEDGE :Ductile iron/ iron+Metal seal ring SEAT ON BODY: Brass/Bronze/Stainless STEM: SS420/SS410 BOLT AND NUT : CARBON 2...
Add to Cart
API 600 Cast Steel Gate Valve 2"-48" Class150-2500 Technical specification Design & manufacturing standard as per API 600/API603 Face to face standard...
Add to Cart
...
Add to Cart
Industrial Jis10k Flanged For Steam Service Standards: Design Standard:ANSI B16.34 / API 600 / API 602 Inspection & Test: API...
Add to Cart
Y Strainer Ductile or Cast Iron Class 125/150 ANSI PN16/PN10 The strainer incorporates a stainless steel wire mesh or punched plate that filters out f...
Add to Cart
...℃(carbon ), -29 ~ 550℃(WC6, WC9) to cut off or connect the fluid in the pipes. Different materials can be applied to various fluids respective...
Add to Cart
Design Feature: Bolt bonnet . Casting or forged body. Full port or reduced port design. Back seal design. Stem is one-piece wrought material. Flexible...
Add to Cart
... Plange End Trunnion Type Floating Ball Introduction Worm gear flange ball and belong to the same type o...
Add to Cart