f436 flat washer

... Hot Dip Galvanized Steel Structural ASTM Hot Dip Galvanized Steel Structural Made In China. We off...

... Hardened are made physically stronger through hardening or carburizing, but are generally smaller in size than your stand...

In addition to the common specifications and standard parts on the market, we can also customize the different specifications of the shaped parts acco...

Galvanized Carbon Steel ASME B18.22.11/2 3/4 5/16 3/8 M36 Standard: DIN, ISO, ANSI/ASTM, GB, BS, BSW, JIS etc Type , Spring, curv...

1.4541 sizes sae Product Range: Bolt, nut, , thread rod ,round bar,rivets and other fasteners and standard ,non standard...

... ASTM covers the chemical and mechanical requirements for hardened in diameters ranging from 1/4″ to 4″ inclusive. These heat trea...

astm din6916 din433 din7989 40mm id 52mm-57mm od stainless steel Product name Plain Used For Screws That Diameter...

Galvanizing F436 Stainless Steel Flat Washers High Hardness Strength Product Specification Packing: bulk in cartons (25kg Max.)+wood Pallet or accordi...

... for general purpose and structural use with bolts, nuts, studs, and other internally and externally threaded fasteners. Dimensional specifications...

, spacer and pin: , tooth , spring , ring , split pin, dowel pin, spacer Material: Steel, alloy steel Standard: DIN...

... Black Oxide Fender Aluminum Description Typical size #8 x 0.437 1/4 x 1/2 1/4 x 3/4 1/4 x ...

...

.... It possesses the highest physical and electrical insulation properties and has increased resistance to creep (compression) under load. Product na...

...spring pad to pay attention to the direction of the opening, or else from the anti-loose little effect. are usually thin pieces of var...

... M10.M12.M14 Product Description: A is a thin plate with a hole typically in the middle that is normally used to distribute the l...

... Shim Flat DIN125 1,Description: The is a fastener used between the supporting surface of the bolt, screw or nut and the...

... as following: 1. standard :DIN,ASTM,BS,NF,ISO ,JIS...ETC , Size :M1.6-M56, SAE NO.4 - SAE 3" thickness :0.5mm-10mm ......

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;border-bottom-wid...