mixing drilling mud

... tank bottom. AIPU series agitators There are different models APMA3, APMA7.5, APMA11, APMA15, PMA18,PMA22,etcetera. Presently, the helical beve...

... Shear Pump ISO Certified , With Short Delivery Product Introduction TR Solids Control is a professional manufacturer engaged in shear ...

... loss of fluid. With this device, fluid materials can be fully dispersed and . The jet device is composed of a sand p...

Solid control system mud agitator model JB/W2.2 Motor power2.2KW Mud Agitator Description Drilling rig mud agitator used in oilfield to mix drilling m...

...Full Automatic Decanter Centrifuge Description On account of the difference in density, the liquid in the container, after a per...

... for adding and bentonite to prepare and increase fluid weight, change fluid density, change density, viscosity, and dehydrate....

... RS-250-10 Pump 15Kw / 1500 RPM Pump for wireline exploration core RS-250 Pumps is equipped with dr...

... tools and to carry the rock debris up to the ground. It is applied to geological core and prospecting with depth less than 3000 ...

... Pump For Borehole Product Description: A pump (sometimes referred to as a pump or pump), is a r...

... Pump for 800m water well hole Application BW1500/12 deep hole hydraulic plunger triplex heavy duty slurry pump BW1500/12 ...

...”) through the bit and back up to the surface. The pump also provides pressure to keep the bit from becoming plugged. The i...

... Pump Max Flow Rate 600L/min Machine Description The BW600 pump is equipped with equipment to holes with . During...

...flow for impact. According to the importance of its work, it is compared to the heart of the rig. circulation is a key operation in th...

... into the fluid is supplied, comparing the same type of pump and the pump with small size, light weight, more suitable for geological expl...

... Centrifuge Product General Description: LW series Centrifuge for separation of detrital material of is widely used in so...

... is mainly used to agitate and the to prevent solids particles from depositing in the circulating tank and to stabilize the perfor...

... flow enters the motor through the bypass valve from the outlet of the pump. This flow creates pressure losses at the inlet and outlet of t...

... Pump Description The tructure meets API674 and GB/T9234 with higher power load to fit the different siteIts flow rate range is 13-150m³/h with ...